Abstract:Low-temperature fouling becomes severer as the selective catalyst reduction (SCR) system is widely applied in the power plant. In this study, the effect of two additives on the fouling of the heat exchanger in the coal-fired power plant (such as air preheater, economizer) has been investigated. The growth curves, heat flux, and effective thermal conductivity are obtained. Both additives have a significant effect on inhibiting the low-temperature fouling. With an increasing flow rate of the additive, the inhibitory effect on the low-temperature fouling becomes more significant, and the sodium carbonate (SC) shows a better inhibitory effect on the low-temperature fouling. The effective thermal conductivities of the low-temperature fouling are 0.357 W/m/K, 0.275 W/m/K, 0.235 W/m/K, 0.215 W/m/K, 0.340 W/m/K, 0.285 W/m/K, and 0.232 W/m/K for Initial, SC1, SC2, SC3, SBC1, SBC2, and SBC3, respectively. To clarify the reduction mechanism of low-temperature fouling, the SEM-EDX analysis is conducted. The results show that the decreasing ammonium bisulfate (ABS) concentration in the low-temperature fouling with increasing injection quantity of additive can result in a loose microstructure which leads to a lower effective thermal conductivity. The present study help to understand the reduction mechanism of low-temperature fouling in air preheaters and economizers.

EXPERIMENTAL STUDY ON FLUORINE RETENTION PROCESS AND ADDITIVE UNDER HIGH TEMPERATION DURING COAL COMBUSTION

Experimental Research on Fluorine Retention of Alkaline-Earth Metal Compounds During Coal Combustion

Experimental Research on Combustion Fluorine Retention Using Calcium-Based Sorbets During Coal Combustion (II)

Fluidization of Cohesive Fluorite Particles at Ambient/High Temperatures and Enhancement Methods

Experimental Study on Fluorine Emission and Retention During Coal Combustion in Fluidized Bed

Industrial test research on the fluorine removal technology during coal combustion

High temperature in-situ synchrotron-based XRD study on the crystal structure evolution of C/C composite impregnated by FLiNaK molten salt

FLUORIDE EMISSION CONTROL BY BLENDING AND INJECTING CaO AND CALCIUM-BASED SORBENTS DURING COAL COMBUSTION

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

[Study on the Calcium-Based Sorbent for Removal Fluorine During Coal Combustion].

Experimental Study On Behavior Of Fluorine And Retention Of Fluorine And Sulphur During Coal Combustion In The Small-Scale Industrial Boiler

Fluorine Removal Efficiency of Organic-Calcium During Coal Combustion

Experimental on Fluorine Emission Characteristics and Influence Factors During Coal Combustion (Ⅰ)

Experimental study on SO2 absorption rate enhanced by additive in limestone-gypsum WFGD process

Application and experimental investigation of compound additive enhanced wet flue gas desulfurization process

Study on the sorbent for removal of fluorine/sulfur from burning coal

12th International Conference on Fluidized Bed Technology EFFECT OF ADDITIVES ON THE ASH FUSION TEMPERATURE

Theoretical and Experimental Research on High Fusion Temperature Coal Ash Doped with Borax Fluxing Agent

AN EXPERIMENTAL INVESTIGATION ON HUMIDIFIED ACTIVATION FLUE GAS DESULFURIZATION WITH HIGH CaO CONTENT FLY ASH

Experimental Investigation of the Effect of Two Additives on the Characteristics of Low-Temperature Fouling with an In-Situ Measurement Technique

The Study of the Effect of Calcium Base on the Coal Ash Fusibility