Abstract:Managing insertion losses, polarizations and device footprint is crucial in developing large-scale photonic integrated circuits (PICs). This paper presents a solution to these critical challenges by designing a semiconductor optical amplifier (SOA) in the O-band with reduced polarization sensitivity, leveraging the ultra-compact InP Membrane on Silicon (IMOS) platform. The platform is compatible with close integration atop electronics, via densely populated vertical interconnects. The SOA incorporates a thin tensile-strained bulk active layer to mitigate polarization sensitivity. The developed 500 um long SOA has a peak gain of 11.5 dB at 1350 nm and an optimal polarization dependency of less than 1 dB across a 25 nm bandwidth, ranging from 1312 nm to 1337 nm. The device is practical for integrated circuits where multiple amplifiers work in cascades with a minimal 6.5 dB noise figure (NF) measured at the gain peak. The designed vertical active-passive transition, achieved through inverse tapering, allows for effective field coupling in the vertical direction resulting in a transmission efficiency of over 95% at the transition and minimal polarization sensitivity of less than 3%. The device yields significant gain at a small current density of less than 3 kA/cm2 as the result of minimalist gain medium structure, reducing joule heating and improving energy efficiency. This is especially relevant in applications such as optical switching, where multiple SOAs populate the PIC within a small area. Consequently, the simulated and fabricated low polarization sensitive O-band SOA is a suitable candidate for integration into large-scale, ultra-compact photonic integrated circuits.

Wide-Band Polarization-Independent Semiconductor Optical Amplifier Gate with Tensile-Strained Quasi-Bulk InGaAs

Semiconductor Optical Amplifiers with Wide Gain Bandwidth and Enhanced Polarization Insensitivity Based on Tensile-Strained Quantum Wells

Low-Polarization, Broad-Spectrum Semiconductor Optical Amplifiers

Polarization Insensitive InGaAs/InGaAsP/InP Amplifiers Using Quantum Well Intermixing

InGaAs/InGaAsP Diffused Quantum Wells Optical Amplifiers and Modulators

Monolithic Integrated Semiconductor Optical Amplifier With Broad Spectrum, High Power, and Small Linewidth Expansion

Ultrabroadband and Independent Polarization of Optical Amplification with InGaAs-based Indium-Rich Cluster Quantum-Confined Structure

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity

Ultra-broadband Depolarization Based on Directly-Coupled Quantum Wire-to-well Modulation and Their Aliasing Effect for Polarization-Insensitive Light-Emitting Diodes.

A Review of High-Power Semiconductor Optical Amplifiers in the 1550 nm Band

Polarization Insensitive Gain Medium with Hybrid Strained Quantum Well

Semiconductor optical amplifiers for the 1000—1100-nm spectral range

Saturation Characteristics of Ga/sub 0.68/in/sub 0.32/as/gainasp/inp Tensile-Strained Quantum-Well Semiconductor Laser Amplifiers with Tapered-Waveguide Structures

Efficiency-boosted semiconductor optical amplifiers via mode-division multiplexing

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

Saturation Characteristics of Ga1-xInxAs/GaInAsP/InP Tensile-Strained Quantum-Well Semiconductor Laser Amplifiers with Tapered Waveguide Structures

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

InAsP/InGaAsP quantum-well 1.3 [micro sign]m vertical-cavity surface-emitting lasers

Low Polarization Sensitive O-band SOA on InP Membrane for Advanced Photonic Integration

Multi-Wavelength Fiber Ring Laser with Semiconductor Optical Amplifier

Compact Silicon Photonic Hybrid Ring External Cavity (Shrec)/ingasb-Algaassb Wavelength-Tunable Laser Diode Operating from 1881-1947 Nm