Abstract:<p>The present paper focuses on the study of a scramjet asymmetric nozzle at various operations by applying both experimental and numerical methods, which confirms the reliability of the single expansion ramp nozzle (SERN) design method under geometric constraints based on maximum thrust theory as well. The pitot pressure measurement is used to calibrate the exit Mach number of the facility nozzle. The combination of schlieren photograph, static pressure measurement and strain-gauge balance is employed to obtain the flowfield feature, pressure distribution along the SERN wall and forces acting on the experimental model. Besides, the numerical method is also applied to achieve the more detailed flowfield and performance of the SERN. The results show that the flowfield structure is obviously different between at the experimental conditions and at the actual flight operations. As the interaction of the nozzle plume with the external flow, the shock waves following the expansion waves at the trailing edge of the SERN are all presented at both overexpanded and underexpanded conditions; however, the SERN core flow is independent of the external flow. The existing of two platforms with high-pressure at the front areas of the ramp and cowl are beneficial for improving the thrust performance, verifying the superiority of the new SERN design method. The error of the force between the numerical and experimental results is relatively small, denoting the capability of the numerical method. Furthermore, along with the increase in the flight Mach number, the axial thrust coefficient is decreased, while the lift and pitching moment coefficients are increased. Compared with the cases at the overexpanded operations, the axial thrust loss arising from the underexpanded flow is more serious at certain operations.</p>

Numerical and Experimental Study of a Plug Nozzle with two Rectangular Inner cells

Numerical Simulation of flow characteristics in a new-type multistage nozzle of pressure drop

Design and Optimization of Three-Dimensional Supersonic Asymmetric Truncated Nozzle

Performances Analysis of Asymmetric Minimum Length Nozzles

Numerical Simulation of Two Coalescing Turbulent Forced Plumes in Linearly Stratified Fluids

STUDY ON NUMERICAL SIMULATIONS OF A PLUG NOZZLE FOR ROCKET ENGINE

NUMERICAL SIMULATION OF PLUG NOZZLE FLOWFIELDS AT DIFFERENT AMBIENT PRESSURES

Numerical Investigation of Separated Plug Nozzle Flow

Experimental and Numerical Studies on Tile-Shaped Aerospike Nozzle

Experimental Studies on Plug Nozzle Performance by Changing the Angle of the Primary Nozzle

Numerical Study on the Effect of a Lobed Nozzle on the Flow Characteristics of Submerged Exhaust

Application study of plug nozzles for solid rocket motors

Numerical study of swirl nozzle internal flow field : Launcher Technology

Numerical Analysis on the Performance of Dual-Bell Nozzle

Numerical Simulation and Experiments on Gas Flow in Micro-Nozzle

Effect of film cooling structures on the cooling characteristics of plugs for two-dimensional (2-D) plug nozzle

Performance Prediction of Conical Nozzle Using Navier-Stokes Computation

Numerical Study on Nozzle Exit Flow Angle for Radial Turbine

Experimental Investigations on the Vectoring Characteristics of the Axisymmetric Divergent Bypass Dual Throat Nozzle

GAS FLOW CHARACTERISTICS IN MICRO-NOZZLE

Experimental and numerical investigations of a scramjet nozzle at various operations