Abstract:In this article, we present a four-channel direct digital synthesis (DDS) design that operates with a common clock ranging from 500 MHz to 24 GHz and generates output frequencies up to 1.75 GHz. A key feature of this board is its custom field-programmable gate array (FPGA)-based synchronization method, which ensures alignment accuracy of 170 ps between the channels, enabling precise frequency and phase relationship settings. In addition, the DDS board incorporates a user-friendly web interface that allows for continuous control and monitoring capabilities over TCP/IP. Multiple synchronized channels can be power-combined to produce a low-phase noise output due to coherent addition of the common carriers and the noncoherent addition of the residual DDS noise. By exploiting these principles and combining eight parallel channels of two DDS boards, we achieve exceptional residual phase noise performance, with L(1Hz)=-147dBc/Hz and L(100kHz)=-180dBc/Hz for a 9.765625 MHz output signal. These noise levels surpass the previously reported results achieved with regenerative frequency dividers. We also present a method for obtaining accurate residual noise measurements using an absolute phase modulation (PM) noise and amplitude modulation (AM) noise nalyse. Furthermore, we nalyse the phase alignment tolerances required to minimize the AM-to-PM and PM-to-AM conversion that commonly occurs in power-combined signals. Finally, we demonstrate the synthesis of a highly stable 9.765625 MHz signal obtained from a cavity-stabilized optical frequency comb (OFC), with an absolute white phase noise of -180 dBc/Hz.

The DDS Frequency Synthesizer for Mobile Communication

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

Novel DDS-Based Method to Realize OFDM Baseband Signals

A Dds-Based C-Band Wideband Agile Frequency Synthesizer

Ultra-Low Phase Noise Frequency Division With Array of Direct Digital Synthesizers

DDS Chip AD9956 and Its Application

A Millimeter-Wave Frequency Synthesizer Architecture with High Agility and High Resolution Performance

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

Design of C-band wide band small step and low phase noise frequency source based on DDS

Research on a Low-power Direct Digital Frequency Synthesis

A 0.8–4.2 GHz Monolithic All-Digital PLL Based Frequency Synthesizer for Wireless Communications

A Low Spurious and Small Step Frequency Synthesizer Based on PLL-DDS-PLL Architecture

Simulator for hopping-frequency microwave synthesizer based on DDS and PLL

An Area Optimized Direct Digital Frequency Synthesizer Based on Improved Hybrid CORDIC Algorithm

Development of DDS Digital Synthetic Frequency for Chirp Signal Generation

Note: A High-Frequency Signal Generator Based on Direct Digital Synthesizer and Field-Programmable Gate Array.

DDS Based Radar Signal Generator for Microwave Remote Sensing

Generation Of Arbitrary Waveform And Frequency Modulation Based On Dds

Design of Improved Dds Signal Generator Based on Amplitude to Phase Sampling

Design and Experiments of a Waveform Generator Based on DDS Technology