Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Design and Experimental Study of Laser Self-Mixing Microscopic System

Advancing Integrated Photonics and Microreactor Technologies with Ultrafast Laser Processing

Research on the Key Technologies of Microchip Laser Common-Path Frequency-Modulation Feedback Interferometer

A Microchip Laser Source with Stable Intensity and Frequency Used for Self-Mixing Interferometry

Optimization of the Laser Vibrometer Based on the Self-Mixing Effect in a Diode Laser

Theory and experiment study of micro/nano photothermal expansion

The Discovery of Nanometer Fringes in Laser Self-Mixing Interference

Simulation of laser internal cavity length and refractivity dependence of self-mixing interference velometry

Self-Mixing Interference in Dual-Polarization Microchip Nd:YAG Lasers

Theoretical and experimental study of intensity branch phenomena in self-mixing interference in a He–Ne laser

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Research on Self-mixing Interference Effect and Micro-vibration Measurement of Semiconductor Laser at Moderate Feedback Condition

High-profile-quality microchannels fabricated by UV picosecond laser for microfluidic mixing

Self-mixing Velocimetry Based on Verical-Cavity Surface-Emitting Laser

Influences of Linewidth Enhancement Factor of Semiconductor Laser on Self-Mixing Signal

Common-path Heterodyne Self-Mixing Interferometry with Polarization and Frequency Multiplexing

Laser micro-nano manufacturing technology for liquid crystal microdroplets with diverse inner structures

Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser

Experimental Research on Water-Jet Guided Laser Processing

Laser-Induced Thermal Bubble-Mixing on A Microfluidic Platform for Lab-On-A-Chip Applications

Self-Mixing Interferometry with Terahertz Quantum Cascade Lasers