Abstract:To study the Cu‐Fe modification and CO denitration mechanism of carbon‐based sorbent, coconut‐husk activated carbon (AC), which was activated via air thermo‐oxidation and modified using Cu(NO3)2 and Fe(NO3)2 was examined. In addition, the denitration activity was evaluated. The effects of air thermo‐oxidative activation, as well as Cu(NO3)2 and Fe(NO3)2 immersion on the pore texture and surface characteristics of the carbon materials, were examined by scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) analysis, X‐ray powder diffraction (XRD) and Fourier‐transform infrared (FTIR) spectroscopy. The reduction performance and CO adsorptive property of xCu‐yFe/AC catalyst was measured using hydrogen temperature‐programmed reduction (H2‐TPR) and carbon monoxide temperature‐programmed desorption (CO‐TPD). The xCu‐yFe/AC's denitration activity showed that physical adsorption is a priority, then chemical adsorption recovers the denitration activity after physical adsorption saturation. The modification mechanism showed that higher loading of Cu and Fe resulted in enhanced dispersivity and more active sites but decreased specific surface area and pore volume. Then, the capability of physical adsorption decreased. Moreover, higher Fe loading was conducive to improved dispersivity of copper oxide species. The effects of Cu and Fe modification on the majority of functional groups were insignificant. The reduction peak at approximately 150°C indicated that the xCu‐yFe/AC catalyst has strong reduction characteristics. The number of CO active adsorption sites increased by high loading quantity at high‐temperature. The CO‐selective catalytic reduction (SCR) denitration conforms to Langmuir–Hinshelwood mechanism. The reciprocal transformation between Fe2+ and Fe3+, Cu+ and Cu2+, which is conducive to the rapid progress of the CO‐SCR reaction.

Adsorption and Catalytic Combustion of Arb on Cuo-Fe2o3

Removal of azo-dye Acid Red B (ARB) by adsorption and catalytic combustion using magnetic CuFe2O4 powder

Preparation of Magnetic G-C3n4/fe3o4 Composite and Its Application in the Separation of Catechol from Water

CuFe2O4/activated Carbon Composite: a Novel Magnetic Adsorbent for the Removal of Acid Orange II and Catalytic Regeneration.

Magnetic powder MnO-Fe2O3 composite--a novel material for the removal of azo-dye from water.

In Situ Ftir Spectroscopic Studies of the Catalytic Combustion of Acid Red B on Cufe2o4 in the Presence and Absence of O-2

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

Study On Cuo/Al2o3 Catalytic Ozone Treatment Of Acid Red B Solution

Fe3O4 and MnO2 Assembled on Honeycomb Briquette Cinders (HBC) for Arsenic Removal from Aqueous Solutions

Removal of Acid Red B from Water by Surface Modified Fe3O4

Removal of azo dye Acid Red B(ARB) by magnetic ferrite adsorbents

Efficient Photodegradation of Acid Red B by Immobilized Ferrocene in the Presence of UVA and H2O2.

Heterogeneous Photo-Fenton Degradation of Acid Red B over Fe2O3 Supported on Activated Carbon Fiber.

MAGNETIC Fe3O4-CuO/BIOCHAR NANOCOMPOSITE FOR ADSORPTION OF INORGANIC ANIONS FROM AQUEOUS SOLUTION

Preparation of a novel Fe3O4/HCO composite adsorbent and the mechanism for the removal of antimony (III) from aqueous solution

Facile preparation of Fe2O3 Al2O3 composite with excellent adsorption properties towards Congo red

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Arsenic Sorption and Redox Transformation on Iron‐impregnated Ordered Mesoporous Carbon

Cu‐Fe/activated carbon catalyst for low‐temperature CO‐selective catalytic: Modification and denitration mechanism

Sonochemical Synthesis and Characterization of Magnetic Separable Fe3O4/Ag Composites and Its Catalytic Properties

Adsorption of acid red 18 from aqueous solutions by GO-COFe2O4: Adsorption kinetic and isotherms, adsorption mechanism and adsorbent regeneration