Abstract:Surface active magnetic materials having sutable anchoring moieties are of great interest in the fields of environmental pollution management. Here, 3,5-diaminobenzoic acid (DABA) functionalized Fe3O4 (Fe3O4@DABA) nanoparticles were synthesized for adsorbing anionic pollutants from wastewater. First, Fe3O4 nanoparticles were fabricated using aqueous coprecipitation of Fe3+ and Fe2+ ions, and then, the bare-surface of Fe3O4 was functionalized concomitantly with DABA. The production of Fe3O4 particles and their surface functionalization with DABA, and thermal stability of Fe3O4@DABA were confirmed by Fourier transform infrared spectroscopy and gravimetrically. Core-Fe3O4 particles had spinel structure, and their concurrent surface-functionalization did not alter the initial phase-purity of Fe3O4 revealed by X-ray diffraction study. Fe3O4@DABA particles showed nano-sized, spherical-shaped, improved surface morphology, surface area, surface porosity, and pH-dependent surface activities. Fe3O4@DABA nanoparticles exhibited higher hydrodynamic average diameter and better aqueous dispersity than that of bare-Fe3O4. The saturation magnetization of Fe3O4@DABA was found to be 47 emu/g at ambient conditions. Our designed magnetic Fe3O4@DABA nanoadsorbent showed very high affinity towards the uptake of azo dye molecules: maximum adsorption of 259 mg/g for Congo red (CR) and 282 mg/g for Eosin yellow (EY) was reached at pH 3 and 25 °C by using an adsorbent dose of 0.02 g. Adsorption isotherm and kinetic study suggested both CR and EY adsorption followed the Freundlich adsorption model and pseudo-first-order kinetics. The adsorbed azo dye was eluted effectively from the surface of investigated nanoadsorbent by aqueous alkali (0.1 M NaOH) treatment. In addition, Fe3O4@DABA showed excellent magnetic recyclability without considerable loss of adsorption capacity. After recycling five-times, the adsorption efficiency of Fe3O4@DABA was slightly declined (90.16% for CR, and 95.52% for EY) than that of the initial adsorption.

Removal of Acid Red B from Water by Surface Modified Fe3O4

Removal of azo dye Acid Red B(ARB) by magnetic ferrite adsorbents

Removal of Azo Dye from Water by Magnetite Adsorption–Fenton Oxidation

Removal of Water-Soluble Azo Dye by the Magnetic Material Mnfe2o4

Heterogeneous Photo-Fenton Degradation of Acid Red B over Fe2O3 Supported on Activated Carbon Fiber.

Enhanced adsorption of dye on magnetic Fe3O4 via HCl-assisted sonication pretreatment

Removal of azo-dye Acid Red B (ARB) by adsorption and catalytic combustion using magnetic CuFe2O4 powder

Adsorption of AR114 onto humic acid-modified Fe3O4 nanoparticles

Activated Carbon Assisted Fenton-like Treatment of Wastewater Containing Acid Red G

Characterization of Sn-MOF and its adsorption application for Acid Red 3R

Magnetic powder MnO-Fe2O3 composite--a novel material for the removal of azo-dye from water.

Mineralization Of An Azo Dye Acid Red 14 By Photoelectro-Fenton Process Using An Activated Carbon Fiber Cathode

Mineralization of an Azo Dye Acid Red 14 by Electro- Fenton'S Reagent Using an Activated Carbon Fiber Cathode

Magnetically Recyclable Adsorption of Anionic Pollutants from Wastewater using 3,5-Diaminobenzoic Acid-Functionalized Magnetic Iron-Oxide-Nanoparticles

RhB Adsorption Performance of Magnetic Adsorbent Fe3O4/RGO Composite and Its Regeneration Through A Fenton-like Reaction

Preparation of Fe3O4/TiO2/Polypyrrole Ternary Magnetic Composite and Using As Adsorbent for the Removal of Acid Red G

Adsorption and Catalytic Combustion of Arb on Cuo-Fe2o3

Magnetic biochar based on furfural residue as an excellent candidate for efficient adsorption of Tetracycline, Bisphenol A, Congo red, and Cr6+

Magnetically separable Co0.6Fe2.4O4/MIL-101-NH2 adsorbent for Congo red efficient removal

Efficient Photodegradation of Acid Red B by Immobilized Ferrocene in the Presence of UVA and H2O2.

Electrochemical generation of hydroxyl radicals for acid red B degradation by activated carbon fiber electrodes