Abstract:PO4(3-) and SiO3(2-) are often used as modifier to improve stability and aggregating ability of the iron-base coagulants, however, there are few reports about their detailed comparison between the coagulation performance and mechanisms. In this study, three coagulants--polyferric phosphoric sulfate (PFPS), polysilicon ferric sulfate (PFSS), and polyferric sulfate (PFS) were synthesized; their structure and morphology were characterized by Fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and Scanning electron microscope (SEM). Alkali titration and Ferron species analysis were employed to investigate the hydrolysis performance and species distribution. Jar test was conducted to measure their coagulation behaviors at different dosage, pH, and temperatures in which the flocs properties were measured. The results showed that a number of new compounds were formed due to the presence of PO4(3-) and SiO3(2-). Moreover, PFPS and PFSS had similar level in Fea as well as Feb. Among them, PFPS produced more multi-core iron atoms polymer and content of Feb, and the formed flocs were larger and denser. It exhibited superior coagulation performance in terms of turbidity reduction, UV254 removal and residual ferric concentration. Jar test and floc breakage/regrowth experiments indicated other than charge neutrality, the dominated mechanism involved in PFSS was the adsorption between polysilicic acid and solution particle, while PFPS was sweeping, entrapment/adsorption resulting from larger polymer colloid of Fe-P chemistry bond.

Electrokinetic Characteristic and Coagulation Behavior of Flocculant Polyaluminum Silicate Chloride (Pasic)

Study on the Coagulation of Polyaluminum Silicate Chloride(PASC)in Water Treatment

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Alkalinity Effect of Coagulation with Polyaluminum Chlorides: Role of Electrostatic Patch

Comparison of novel magnetic polyaluminum chlorides involved coagulation with traditional magnetic seeding coagulation: Coagulant characteristics, treating effects, magnetic sedimentation efficiency and floc properties

A Randomized Controlled Trial to Compare 2 Scalable Interventions for Lower Urinary Tract Symptom Prevention: Main Outcomes of the TULIP Study

Morphology and Electrical Conductivity of PACS

Guided SAR image despeckling with probabilistic non local weights

Coagulation Properties of an Electrochemically Prepared Polyaluminum Chloride Containing Active Chlorine

PROBING INTO THE MECHANISM OF COMPOSITE POLYALUMINUM SILICATE FLOCCULANTS WITH ION-EXCHANGE TECHNIQUE

Preparation and Coagulation Performance of Polyaluminum Lanthanum Silicate Coagulant

Study on Coagulation Property and Mechanism of High-Alb Polyaluminum Chloride

[Preparation of polyaluminum silicate chloride (PASC) from tetraethylorthosilicate (TEOS) and its physicochemical characteristics].

[Coagulation performance and mechanism of Alb species in polyaluminum chloride in removing humic acid].

Coagulation Behaviour of Polyaluminium Chloride with Different Aluminium Speciation

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Characteristics of Polyaluminum Chloride (PAC) Coagulant Prepared by Baking Process

Effect of Adding Electrolyte in Cement Paste on the Dispersing Force of Polycarboxylate-Type Superplasticizer

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Characterization And Coagulation Performance Of Covalently Bound Organic Silicate Aluminum Hybrid Coagulants: Effects Of Si/Al, B Value And Ph