Abstract:The enhancement mechanisms for single-phase turbulent heat transfer in micro-fin tubes were numerically investigated by simulating the flow in a helical micro-fin tube and a straight micro-fin tube (with the fins aligned with the flow). Flow in parallel plate passages with various height roughness elements was also simulated to further investigate the enhancement mechanisms. The numerical results for the helical micro-fin tube agree well with experimental data. The helical micro-fins begin to enhance heat transfer at a Reynolds number of 10,000 with a 110% increase in the heat transfer rate for Reynolds numbers above 30,000. The heat transfer in the straight micro-fin tube was almost the same as in a smooth tube for Reynolds numbers from 10,000 to 80,000. The additional turbulence generated by the roughness elements or the helical fins is the key mechanism for the heat transfer enhancement. If the roughness elements or the helical fins are inside the viscous sublayer, no additional turbulence is generated and the heat transfer is not enhanced, but when they extend above the viscous sublayer, additional turbulence is generated and the heat transfer is enhanced, hence a critical Reynolds number exists. Straight fins do not generate additional turbulence, hence, the straight micro-fin tube has little effect on the heat transfer enhancement. Additional turbulence is usually accompanied by additional pressure resistance (form drag). Therefore, the key to increasing the efficiency of enhanced heat transfer tubes is to generate additional turbulence near the tube wall with minimum form drag. The high efficiency of the micro-fin tube is due to the effective turbulence generated near the tube wall.

Heat transfer enhancement characteristics of non-decaying swirl flow due to spiral fin

STUDY ON HEAT TRANSFER ENHANCEMENT CHARACTERISTICS WITH A DECAYING SWIRL FLOW

Enhanced Heat Transfer with Swirl Duct under Rolling and Pitching Environment

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Channels

Flow and heat transfer characteristics in a pre-swirl rotor-stator cavity

Effect of dynamic stability of swirl flow on heat transfer

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Effect of Dynamic Stabiliy of Swirl Flow on Heat Transfer

Flow and Heat Transfer Characteristics of a Double-Tube Structure Internal Finned Tube with Blossom Shape Internal Fins

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Enhancement Mechanisms for Single-Phase Turbulent Heat Transfer in Micro-Fin Tubes

Numerical Analysis of the Enhanced Convection Heat Transfer in an Annular Finned Tube with Laminar Pulsating Flow

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Numerical investigations of fluid flow and heat transfer in double forward facing step in the presence of a fin

Experimental and numerical study on flow field characteristics of a combustion chamber with double-stage counter-rotating swirlers

Thermo-hydraulic Investigation of a Heat Exchanger Tube Equipped with 3D-Printed Swirl Flow Generators

Numerical Study on the Effect of Jet Spacing on the Swirl Flow and Heat Transfer in the Turbine Airfoil Leading Edge Region

Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compact Heat Exchangers

HEAT TRANSFER ENHANCEMENT DUE TO SWIRL EFFECTS IN OVAL TUBES TWISTED ABOUT THEIR LONGITUDINAL AXIS

Numerical Study on Flow and Heat Transfer Characteristics of Swirl Cooling on Leading Edge Model of Gas Turbine Blade