Abstract:In this study, the effects of the non-Newtonian rheological properties of the lubricant in a thin-film lubrication regime between smooth surfaces were investigated. The thin-film lubrication regime typically appears in Stribeck curves with a clearly observable minimum coefficient of friction （COF） and a low-COF region, which is desired for its lower energy dissipation. A dynamic rheology of the lubricant from the hydrodynamic lubrication regime to the thin-film lubrication regime was proposed based on the convected Maxwell constitutive equation. This rheology model includes the increased relaxation time and the yield stress of the confined lubricant thin film, as well as their dependences on the lubricant film thickness. The Deborah number （De number） was adopted to describe the liquid-solid transition of the confined lubricant thin film under shearing. Then a series of Stribeck curves were calculated based on Tichy’s extended lubrication equations with a perturbation of the De number. The results show that the minimum COF points in the Stribeck curve correspond to a critical De number of 1.0, indicating a liquid-to-solid transition of the confined lubricant film. Furthermore, the two proposed parameters in the dynamic rheological model, namely negative slipping length b （indicating the lubricant interfacial effect） and the characteristic relaxation time λ 0 , were found to determine the minimum COF and the width of the low-COF region, both of which were required to optimize the shape of the Stribeck curve. The developed dynamic rheological model interprets the correlation between the rheological and interfacial properties of lubricant and its lubrication behavior in the thin-film regime.

Lubrication of tapered roller bearing(Ⅱ):Piezoviscous rigid regime

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Elastic Connecting-Rod Bearing With Piezoviscous Lubricant: Analysis of the Steady-State Characteristics

Effect of effective viscosity on characteristics of microscale gas journal bearings

Visco-elastohydrodynamic Lubrication and Wear Model Amended by Deformation Velocity

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Combined Effect of Rarefaction and Effective Viscosity on Micro-Elasto-Aerodynamic Lubrication Performance of Gas Microbearings

Transient Analysis of the Textured Journal Bearing Operating with the Piezoviscous and Shear-Thinning Fluids

Influence of Shear-thinning Effect on the Characteristics of Journal Film Bearing

Piezo-viscous-polar lubrication of hybrid conical journal bearing with slip boundary conditions

Combined effects of piezo – viscous coupled stress lubricant and rotational inertia upon squeeze film performance of rough circular discs

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Numerical simulations of an incompressible piezoviscous fluid flowing in a plane slider bearing

Lubrication Of Nonconformal Contacts

A Novel Bearing Lubricating Device Based on the Piezoelectric Micro-Jet

Lubrication Model and Dynamic Characteristics of Distributed Liquid Film for Hydrodynamic Bearing

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

A Dynamic Rheological Model for Thin-Film Lubrication

Two-way Thermal-Fluid-Solid Interaction Lubrication Characteristic Analysis of Water-lubricated Rubber Bearings

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

Research the lubrication characteristics on the modified main thrust roller of the slewing bearings