Abstract:The thermohydrodynamic analysis of oil film bearing is essential for high speed oil film bearing. The temperature field is coupled with the pressure field. The numerical model can be built or chosen according to the complexity of the objects and requirement of the accuracy. In this paper, four pressure-thermal (P-T) models are proposed, which are zero-dimensional temperature field coupled with Reynolds equation (OD P-T model), two-dimensional temperature field coupled with Reynolds equation (2D P-T model), two-dimensional temperature with third dimensional correction coupled with Dawson equation (2sD P-T model), three-dimensional temperature field coupled with Dawson equation (3D P-T model). The non-Newtonian and temperature-viscosity effects of the lubrication oil are considered in all the four models. Two types of cylindrical journal bearing, the bearing with/without axial grooves, are applied for the simulation. All the simulated cases are compared with the solutions of the CFX. The results show that the OD P-T model fails to predict the behavior of high speed bearing; The 2D and 2sD P-T model have an acceptable accuracy to predict the performance of the bearing without grooves, but are not able to simulate the P-T field of the bearing with grooves because of the under-developed thermal boundary layer; The 2sD P-T model shows a great improvement when calculating the pressure field compared with the 2D P-T model; the 3D P-T model coincides well with the CFX at any condition. The comparison of these four models provides a reference to help designer choose a proper numerical model for a certain project.

Model and Application of Thermal Effects in Multi-Arc Journal Bearings

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

A Thermohydrodynamic Analysis of Dynamic Coefficients of a Elliptical Journal Bearing Using One-Dimensional Model

A Simplified One-Dimensional Thermal Model for Journal Bearings

Numerical simulation of flow and heat transfer in journal bearing lubrication

Composite thermal oil film lubrication model for hybrid journal bearings

The Comparison Of Four Pressure-Thermal Models Of Oil Film Bearing With The Non-Newtonian And Temperature-Viscosity Effects

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Analysis of Temperature Field Distribution of Magnetic-Fluid Bearing for High-Speed Trains

Lubrication and stability analysis of nonlinear rotor-bearing system

Effect of Effective Viscosity on Performance of Micro Gas Journal Bearings

Thermo-hydrodynamic analysis of large-eccentricity hydrodynamic bearings with texture on journal surface

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

Performance Comparison of Circular, Two-Lobe and Elliptical Journal Bearings Based on Tehd Analysis

Thermo-mechanical analysis of angular contact ball bearing

Parameter Effects on the Static Characteristics of the Multi-Foil Aerodynamic Journal Bearing with Bump-Backing Foils

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Numerical Analysis of Journal Bearings Lubricated with Micropolar Fluids Including Thermal and Cavitating Effects

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing