Abstract:The production of the ion microbeam is traditionally by focusing or/and collimating to reduce the size of the beam to submicron meter scale. The traditional setup for the production of the microbeam consists of an expensive focusing and collimating system with a large space, based on electromagnetic fields. Meanwhile, the microbeam obtained through pure collimation by metal micro-tubes is limited by the fabrication processing, i.e., the beam spot size is very much limited by it in the scale of several microns and it is fabricated not as simple as that of a glass capillary. The use of inexpensive and easy-to-make glass capillaries as the tool for ion external microbeam production has become a new direction, inspired by early research on guiding effects. In this work, we used a glass capillary with the open outlet (108 μm in diameter), serving as a vacuum differential and collimating component, to produce a 2.5 MeV-proton microbeam directly into the atmosphere from the linear accelerator for the measurements. We measured the beam spot diameter and energy distribution of the microbeam as a function of the tilt angle of the capillary. We also conducted calculations and ion trajectory analysis on the scattering process of 2.5 MeV protons on the inner walls. The measurement results show that when the tilt angle is around 0°, there are a direct transmission part maintaining the initial incident energy, and a scattering part with the energy loss in the microbeam. It is found that the proportion of the directly transmitted protons and the beam spot size are at maximum around the tilt angle of zero. As the tilt angle increases, the beam spot diameter decreases; when the tilt angle is greater than the geometric angle, all the microbeam are from the scattering with the energy loss. The simulation combined with the ion trajectory analysis based on the scattering process explained the experimental results. It is found that the large angle scattering determines the overall external microbeam spot, while the central region of the beam spot is composed of directly penetrating ions, and its size is determined by the geometry of the glass capillary, i.e., the outlet diameter and the aspect ratio. The easy and inexpensive production of the external microbeam by glass capillaries has the nature benefits for its relative safe and stable operation, and the last but not least point is the simple positioning of the microbeam to the sample without the complex diagnostic tools. It is expected to be widely used in radiation biology, medicine, materials and other fields.

The Experiment of Obtaining Micron Beam in the Single-Particle Microbeam Facility of the Institute of Plasma Physics

Studies Of The Beam Finding And Targeting Accuracy Of The Cas-Libb Single-Particle Microbeam

Special Way of Increasing Linear Energy Transfer Value Used for Study on Single Event Effect

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Production and Measurement of MeV Proton Microbeams in Atmospheric Environment Based on Glass Capillary

Development of Single-ion Microbeam at Fudan University

Quantitative Single-Ion Irradiation by Asipp Microbeam

Focal Spot Effects on the Generation of Proton Beams During Target Normal Sheath Acceleration

Design of 50 MeV Proton Microbeam Based on Cyclotron Accelerator

Beam optics simulation for the single-ion microbeam facility at Fudan University

Accuracy Measurements of the CAS-LIBB Single-Particle Microbeam for Single Cell Irradiation

Using Tapered Glass Capillary to Focus 2 MeV He+ Ion Beam into Microbeam

Modeling High-Power Microwave Beam Channeling and Self-Focusing by Neutral Gas Ionization

Beam optics of upgraded high energy heavy ion microbeam in Lanzhou

Measurements of the Targeting Accuracy of the Gray Laboratory Charged-Particle Microbeam

Experiments on bright-field and dark-field high-energy electron imaging with thick target material

A Beamline for Micromachining and Micro-Characterization at the APS

Demonstration of High-Efficiency Microwave Heating Producing Record Highly Charged Xenon Ion Beams with Superconducting ECR Ion Sources

Improving the beam quality of the low-energy muon beamline at Paul Scherrer Institute: Characterization of ultrathin carbon foils

MeV Microcluster Beam Interaction with Matter

Novel positron acceleration by continuous coherent mid-infrared radiation in a micro-tube