Abstract:The MW class proton accelerators are expected to play important roles in many fields, attracting institutions to continue researching and tackling key problems. The continuous wave (CW) isochronous accelerator obtains a high-power beam with higher energy efficiency, which is very attractive to many applications. Scholars generally believe that the energy limitation of the isochronous cyclotron is similar to 1 GeV. To get higher beam power by the isochronous machine, enhancing the beam focusing become the most important issue. Adjusting the radial gradient of the average magnetic field makes the field distribution match the isochronism. When we adjust the radial gradient of the peak field, the first-order gradient is equivalent to the quadrupole field, the second-order, the hexapole field, and so on. Just like the synchrotron, there are quadrupoles, hexapole magnets, and so on, along the orbits to get higher energy, as all we know. If we adjust the radial gradient for the peak field of an FFA's FDF lattice and cooperate with the angular width (azimuth flutter) and spiral angle (edge focusing) of the traditional cyclotron pole, we can manipulate the working path in the tune diagram very flexibly. During enhancing the axial focusing, both the beam intensity and the energy of the isochronous accelerator are significantly increased. Here a 2 GeV CW FFA with 3mA of average beam intensity design is presented. It is essentially an isochronous cyclotron although we use 10 FDF lattices. The key difficulty is that the magnetic field and each order of gradient should be accurately adjusted in a large radius range. As a high-power proton accelerator with high energy efficiency, we adopt high-temperature superconducting (HTS) technology for the magnets. 15 RF cavities with a.. value of 90000 provide energy gain per turn of similar to 15MeV to ensure the CW beam intensity reaches 3 mA. A 1:4 scale, 15-ton HTS magnet, and a 1:4 scale, 177MHz cavity have been completed. The results of such R&D will also be presented in this paper.

Demonstration of High-Efficiency Microwave Heating Producing Record Highly Charged Xenon Ion Beams with Superconducting ECR Ion Sources

Ultra-high Charge Electron Acceleration for Nuclear Applications

The R&D progress of 4 MW EAST-NBI high current ion source

Results from Energetic Electron Beam Metal Vapor Vacuum Arc and Z-Discharge Plasma Metal Vapor Vacuum Arc: Development of New Sources of Intense High Charge State Heavy-Ion Beams

A 2.45 Ghz Electron Cyclotron Resonance Proton Ion Source and A Dual-Lens Low Energy Beam Transport

Monoenergetic Ion Beam Acceleration from Transversely Confined Near-Critical Plasmas by Intense Laser Pulses

Demonstration of Self-Truncated Ionization Injection for GeV Electron Beams

Design of a Compact, Permanent Magnet Electron Cyclotron Resonance Ion Source for Proton and H2+ Beam Production

High-gradient High-charge CW Superconducting RF Gun with CsK2Sb Photocathode

Towards a high-intensity muon source

Modeling High-Power Microwave Beam Channeling and Self-Focusing by Neutral Gas Ionization

Generation of Quasi-Monoenergetic Heavy Ion Beams Via Staged Shock Wave Acceleration Driven by Intense Laser Pulses in Near-Critical Plasmas

Submillisecond Chromium Ion Beams with High-Pulse Power Density

Microwave Discharge Ion Sources

An extremely high charge electron accelerator from high power laser-solid interaction

Electrostatic Capacitance-Type Acceleration of Ions with an Intense Few-Cycle Laser Pulse

Electron Beam and Betatron X-Ray Generation in a Hybrid Electron Accelerator Driven by High Intensity Picosecond Laser Pulses

High-energy proton beam acceleration driven by an intense ultrarelativistic electron beam in plasma

HIGH ENERGY DENSITY PHYSICS WITH INTENSE PARTICLE AND LASER BEAMS

Innovative research and development activities on high energy and high current isochronous proton accelerator