Reuse of an Aerobically Treated Wastewater Effluent for the Removal of So2 in the Flue Gas

Y Liu,LM Ma,HHP Fang,TY Gao,ZX Xu,YC Wang,ZG Jing

DOI: https://doi.org/10.2166/ws.2003.0014

2003-01-01

Abstract:Aerobically treated wastewater effluent (ATWE), intrinsically having high alkalinity, was used to remove sulfur dioxide (SO2) in the flue gas of a coal power plant. Experimental results conducted in a four sieve-tray tower showed that ATWE absorbed SO2 in flue gas effectively. At a gas:liquid (G:L) ratio of 110:1, the respective SO2 removal efficiencies were 99% and 95% for flue gases containing 1,600 and 5,000 Mg/kL of SO2. When the G:L ratio increased to 220:1, the removal efficiency was slightly lowered to 93% for the flue gas containing 1,600 Mg/kL of SO2. ATWE had higher buffer capacity and SO2 removal efficiencies as compared to seawater, a common SO2 scrubbing medium serving as control. In addition, the equilibrium equation between SO2 partial pressure and concentration of bisulfite (HSO3-) in ATWE and the kinetic equation describing the rate of SO2 absorption in the sieve-tray tower by ATWE were established. The absorbing coefficients in the kinetic equation were determined to be 1.96 ± 0.37 mol/(m2ásábar) for gas phase and 0.00184 ± 0.00049 m/s for liquid film. The enhancement factor of the absorbing coefficient in liquid film was 14.28 ± 1.79, resulting in 93% of the decrease of liquid film resistance. The SO2 absorption rate in the sieve-tray tower was mainly affected by the gas film resistance, representing 96% of the total resistance. Experimental results of this study confirmed that the removal of SO2 from the flue gas of coal power plants by ATWE was cost-effective. This process does not require the addition of any chemicals and produces no secondary pollution.