Abstract:The bio-inspired 2024Al/B4C composites with a laminate-reticular hierarchical architecture were constructed by squeeze casting of 2024Al into loose freeze-cast ceramic scaffolds. This pressurized infiltration process provided a clean and well-bonded interface without physical gaps. By regulating the initial suspension concentration (20, 25, 30 and 35 vol%), the effects of different ceramic content on the microstructure, damage-tolerance behavior and toughening mechanisms of the composites parallel and perpendicular to the ice-growth direction were investigated. The strength and toughness in the longitudinal direction were greater than that in the transverse direction. The 2024Al/20 vol% B4C composite in the longitudinal direction yielded the highest flexural strength of 658 MPa, crack-initiation toughness (KIc) of 18.4 MPa m1/2 and crack-growth toughness (KJc) of 27.5 MPa m1/2. The unique damage-tolerant properties were attributed to multiple toughening mechanisms, including crack deflection, branching and blunting, ductile-ligament bridging and multiple-crack propagation, as evidenced by the stable crack growth and rising R-curve behavior during fracture. The significantly decreased damage tolerance in the transverse direction was mainly due to inadequate toughening tools. On the other hand, both the flexural strength and fracture toughness reduced remarkably as the ceramic content increased. The 2024Al/35 vol% B4C composite fractured in a single-crack mode and the crack growth path was almost straight, showing a relatively low flexural strength (502 MPa) and crack-initiation toughness (9.1 MPa m1/2). The toughening mechanism was discussed in terms of the relationship between structural characteristics and cracking mode.

Aluminum matrix composite with eucryptite particle and aluminum borate whisker

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

High damage-tolerance bio-inspired B4C/2024Al composites with adjustable mechanical performance by tuning ceramic thickness

Microstructure and property evolution of aluminium/potassium titanate whiskers composite during Rheo-casting

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Synthesis of an (Al3BC + Al2O3)/Al composite with high stiffness and attractive high-temperature tensile properties

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructure evolution and tensile behavior of MgAlB4w/Al composites at high temperatures

Microstructure and thermal properties of binary ceramic particle-reinforced aluminum matrix composites with SiC/LAS

Design and preparation of BaO–Al2O3–SiO2–B2O3/Quartz LTCC composites with tailored coefficient of thermal expansion

Effects of Zr-Cu Alloy Powder on Microstructure and Properties of Cu Matrix Composite with Highly-Aligned Flake Graphite

Development of light composite materials with low coefficients of thermal expansion

A tri-modal aluminum based composite with super-high strength

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis

Interface structure and properties of spray-forming (SiCp+β-LiAlSiO4)/6092Al matrix composites

Bioinspired nacre-like 2024Al/B4C composites with high damage tolerance

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

EFFECTS OF RARE-EARTH SURFACE MODIFICATION OF THE Α-Al2o3 MICROPOWDER ON THE PROPERTIES OF ALUMINUM MATRIX COMPOSITES

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Designing high entropy alloy-ceramic eutectic composites of MoNbRe0.5TaW(TiC)x with high compressive strength