Abstract:The hot forming behavior, failure mechanism, and microstructure evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite were investigated by isothermal compression test under different deformation conditions of deformation temperatures of 300–450 °C and strain rates of 0.001-1 s−1. The results demonstrate that the failure behavior of the composite exhibits both particle fracture and interface debonding at low temperature and high strain rate, and dimple rupture of the matrix at high temperature and low strain rate. Full dynamic recrystallization, which improves the composite formability, occurs under conditions of high temperature (450 °C) and low strain rate (0.001 s−1); the grain size of the matrix after hot compression was significantly smaller than that of traditional 7075Al and ex-situ particle reinforced 7075Al matrix composite. Based on the flow stress curves, a constitutive model describing the relationship of the flow stress, true strain, strain rate and temperature was proposed. Furthermore, the processing maps based on both the dynamic material modeling (DMM) and modified DMM (MDMM) were established to analyze flow instability domain of the composite and optimize hot forming processing parameters. The optimum processing domain was determined at temperatures of 425-450 °C and strain rates of 0.001-0.01 s−1, in which the fine grain microstructure can be gained and particle crack and interface debonding can be avoided.

High temperature compression behavior of Al2O3 particle reinforced 6061aluminum alloy composite

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Elevated Temperature Compressive Deformation Behavior of 2024al Matrix Composite Reinforced by Sub-Micro Al2o3 Particles

Hot deformation behavior and microstructural evolution of particulate reinforced AA6061/B4C composite during compression at elevated temperature

Hot compression behaviors and microstructural evolution of Be-38wt.%6061Al

Compressive deformation behavior of α-Si3N 4w/4032 Al composite at elevated temperatures

Al/Al2O3 composite mechanical behaviour of compression in pseudo-semi-solid sate

Microstructure and Mechanical Properties of High Strength Al2o3p/6061al Composites

Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite

Compressive deformation behavior of alpha-Si(3)N(4)w/4032 Al composite at elevated temperatures

Tensile deformation behavior of a sub-micrometer Al2O3/6061Al composite

Microstructure and Mechanical Properties of High Strength Al<sub>2</sub>O<sub>3p</sub>/6061Al Composites

High Temperature Mechanical Behavior and Microstructure of α-Si 3N4w/4032Al Composite Fabricated by Squeeze Casting

Compressive behavior of high particle content B4C/Al composite at elevated temperature

Compressive Deformation Of A -Si3n4 W/4032ai Composite At Temperatures Around The Solidus Of The Matrix Alloy

Hot Deformation Behavior of 2026 Aluminum Alloy During Compression at Elevated Temperature

Microstructural Changes of SiCw/6061Al Composite During Compression at Temperatures below and above the Solidus of the Matrix Alloy

Hot Deformation Behavior and Mechanisms of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composites

Hot deformation behavior and microstructure evolution of Be/2024Al composites

High temperature mechanical behavior and microstructure of alpha-Si(3)N(4)w/4032Al composite fabricated by squeeze casting

Mechanical behaviour of Al/Al2O3 composite in pseudo-semi-solid state during isothermal compression