Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

Numerical simulation of wrinkling in hydroforming of aluminum alloy tubes

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Research on aluminum alloy sheet thermoplastic deformation behavior based upon warm bulging test

Effect of Strain State on the Surface Roughening for Hydroforming of Aluminum Alloy Tube Based on Cross-Scale Numerical Modeling

Plastic wrinkling of thin-walled tubes under axial compression in non-uniform temperature field

Failure control on hydroforming process of thin-walled aluminum alloy with complex surface covers

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Predicting the wrinkling in AA5052 seamless tubes manufactured by free bending forming technology

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Wrinkling of Toroidal Shells in Free Hydroforming

Research on Bursting Behavior in Hydroforming of Double-Cone Tube

Study on Numerical Simulation for Control of Winding Process of Thin Wall Spiral Tube

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

Effects of anisotropic yield criteria on the prediction of wrinkle during the deep-drawing forming of aluminum alloy sheet

Construction of 6061-T6 aluminum alloy constitutive model based on hot bulging test and study on the non-isothermal hydroforming process

Spinning Process of 2219 Aluminum Alloy Tubes for Used in Hydroforming

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm

Modeling of constitutive behavior and ductile fracture of AA5A06 aluminum alloy sheet in warm hydroforming process

Evaluation of the formability of AA2198-T3 Al-Li alloy in warm sheet hydroforming