J Integral and Cod Fracture Criteria in 40crnimo Steel under Mixed Mode I+Ii Loading

JB Sha,J Sun,ZJ Deng

DOI: https://doi.org/10.1179/026708303225009670

IF: 1.8

2003-01-01

Materials Science and Technology

Abstract:By defining the J integral and crack opening displacement (COD) under mixed mode I+II loading, a mixed J integral fracture criterion is proposed and the relationship between the J integral and COD in 40CrNiMo steel is discussed. The mixed J integral J(M) and its mode I and II components J(I) and J(II) were calculated by the finite element method, while the mixed COD and its mode I and II components CTOD and CTSD were measured using a duplicated grid. The critical values J(Mc) and CODc for mixed crack initiation were determined by a resistance curve. The results show that mode II loading lowers both JMc and CODc for 40CrNiMo steel. The variation of J(Mc) from mode I to mode II loading is found to be in accordance with the linked equations J(Mc) = J(II) + J(IIi); (JI(i)/J(Ic)) + (J(IIi)/J(IIc)) = 1, where J(Ic) and J(IIc) are the critical J integrals of pure mode I and II cracks, and J(Ii) and J(IIi) are the mode I and 11 components of J(Mc) at arbitrary mixed K-I/K-II, ratio respectively; the J(Mc) value for a given K-I/K-II ratio can be obtained if J(Ic) and J(IIc) are known. Finally, under valid loads, J(M) and the mixed COD satisfy the relation J(M) = J(I) + J(II) = d(n)sigma(0)CTOD + d(s)tau(0)CTSD. When unified by yield stress sigma(y) the relation becomes J(M) = dsigma(y)COD, where d(n), d(s) and d are coefficients, and sigma(0) and tau(0) are the tensile and shear stress at the crack tip strip respectively. While d(n) and d(s) vary with K-I/K-II ratio and materials, d was found to have a constant value of about 0(.)98.