Abstract:Crack sizes, geometrical configurations of specimens and structures, as well as loading conditions have significant effect on in-plane and out-of-plane constraint effects. Safety assessment with constraint effects can effectively improve the accuracy. There are prominent discrepancies between compressive fracture and tensile fracture. Most of engineering structures are usually under biaxial loading conditions, so that the influence of biaxial compressive loading on fracture analysis with constraint effects is worth paying attention. The size effect factor (relative crack length a/W, thickness to width ratio t/W and crack inclination angle β) and load factor (lateral pressure coefficient λ) of central cracked plate (CCP) specimens with I-II mixed mode crack on constraint effects under biaxial compressive loading have been investigated through theoretical analysis and finite element analysis. In-plane non-singular T-stress (T 11) and its components (T x, T y, and T xy), out-of-plane non-singular T-stress (T 33), out-of-plane constraint parameter T z and stress triaxiality factor h have been adopted to quantify constraint effects. It demonstrates that λ has remarkable influence on SIF, T 11 and T 33 under biaxial compressive loading. The effect of higher a/W (long cracks) on B 11 is more noticeable when I-II mixed mode crack is closer to pure mode II crack or pure mode I crack. The proportion of shear fracture increases under biaxial compression with λ. With the increase of β, B 33 decreases sharply and then increases rapidly with higher λ. T z can directly reflect stress states and adequately describe the loss of out-of-plane constraint. The stress state of crack tip is more likely to asymptotic plane-strain condition ahead of crack tip under compression. There are crucial differences in variation range and tendency of T z subjected to biaxial tensile and biaxial compressive loading. Moreover, T z is insensitive to λ. Stress triaxiality factor h can illustrate in-plane and out-of-plane constraint effects including size effect and load factor (sensitive to a/W, t/W, β and λ), especially can be adopted as a unified constraint parameter for long cracks under biaxial compressive loading. The in-plane T-stress components can be directly calculated by T 11 under biaxial compression. The empirical equations of K II and T 11 containing size effect and load factor simultaneously are effective and convenient for applications.

Crack initiation characteristics of brittle materials with I‐II mixed mode crack under uniaxial compression

Application of modified fracture criteria incorporating T-stress for various cracked specimens under mixed mode I-II loading

Investigation on in-plane and out-of-plane constraint effects for plates with I-II mixed mode cracks under biaxial compressive loading

Internal Stress Distribution and Cracking Around Flaws and Openings of Rock Block under Uniaxial Compression: A Particle Mechanics Approach

Analysis of mixed-mode Compact-Tension-Shear (CTS) specimens with slanted propagating cracks

Research on crack initiation mechanism and fracture criterion of rock-type materials under compression–shear stress

T-stresses solution and out-of-plane constraint for central cracked plate (CCP) with I-II mixed mode crack under uniaxial compression

Prediction of initiation mechanism of three-dimensional penetrating single crack

Fatigue Crack Growth Behavior of CP-Ti Cruciform Specimens with Mixed Mode I-II Crack under Biaxial Loading

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

STUDY ON THE INFLUENCE OF COMPRESSIVE STRESS ON THE COMPRESSION SHEAR CRACK PROPAGATION

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

The Effect of T-stress on the Crack Growth and Propagation of Specimen Subjected I-II Mixed Mode

An improved maximum tangential stress criterion for an inclined crack in uniaxial compression considering T‐stress and crack parameter

Comparison of Constraint Analyses with Global and Local Approaches under Uniaxial and Biaxial Loadings

Stress intensity factors for central cracked circular disk subjected to compression

Rate-dependent mechanical characteristics of rock-like specimens containing single closed crack

Experimental Study on the Size Effect of Compression-Shear Fracture Characteristics of Rock-like Materials Containing Open Cracks

Crack initiation mechanisms of micro-textured Ti60 alloys with different dwell sensitivities subjected to fatigue and dwell fatigue loading

Study the effect of circular hole on dynamic fracture properties of cracked PMMA specimen under impact loads

Determination of Fracture Parameters in Center Cracked Circular Discs of Concrete under Diametral Loading: A Numerical Analysis and Experimental Results