Abstract:Bimetallic composites have a wide range of application prospects in various industries. Different bonding temperatures, as one of the influencing factors, directly affect the bonding effectiveness as well as the performance and application of the materials. Using metallurgical bonding techniques ensures a strong bond at the interface of bimetallic materials, resulting in high-quality composite pipe billets. This paper describes an Incoloy825/P110 steel bimetal composite material made by the solid-liquid composite method. By utilizing ProCAST 14.5 software for simulation and deriving theoretical formulas, an initial range of temperatures for bimetallic preparation has been tentatively determined. And this temperature range will be utilized for on-site experiments to prepare bimetallic samples. After the preparation process is completed, samples will be selected. The influence of the external mold temperature on the interface bonding of Incoloy825/P110 steel solid-liquid composite material is studied using an ultra-depth three-dimensional morphology microscope and a scanning electron microscope. Through research, the optimal preheating temperature range for the solid-liquid composite outer mold of Incoloy825/P110 bimetallic composite material has been determined. The casting temperature of the inner mold has a significant impact on the interface bonding of this bimetal composite material. As the casting temperature of the inner mold increases, the interface thickness gradually increases. At lower temperatures, the interface thickness is lower and the bonding is poorer. At higher temperatures, melting may occur, leading to coarse grains at the interface. When the temperatures of the inner and outer molds are within a certain range, a new phase appears at the interface. Indeed, it increases the strength of the interface bonding. Due to co-melting of the bimetal near the interface, element migration occurs, resulting in increased Ni and Cr content at the interface and enhanced corrosion resistance.

MICROSTRUCTURE OF IRON-NICKEL ALLOY PRODUCED BY CENTRIFUGAL-SHS PROCESS

Iron-nickel Alloy Lined Composite Steel Pipe Produced by Centrifugal-thermit Process

Study on Centrifugal Compound Casting-hot Extrusion-Cold Rolling Process for Composite Pipe

Microstructures of carbon steel/high chromium iron composites prepared by centrifugal casting-hot rolling process

The finite element Analysis of the thermal stress of the stainless steel lined composite steel pipe prepared by centrifugal-SHS

Microstructure, Mechanical Properties and Corrosion of Ceramic-lined Composite Steel Pipe Prepared by Centrifugal-SHS Process

Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe

Interface Microstructure and Mechanical Properties of Nickel/Steel Bimetal Composite Pipe Fabricated by Explosive Welding

Research on the Solid-Liquid Composite Casting Process of Incoloy825/P110 Steel Composite Pipe

Effect of Solidification Segregation on Microstructure and Mechanical Properties of a Ni-Cr-Mo-V Steel Weld Metal

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

Microstructure and mechanical properties of TIG welded 20G/ 316L clad pipe joint

Centrifugal casting austempered ductile iron pipe

Microstructural Evolution of Wrought-Nickel-Based Superalloy GH4169

Wetting Behavior of Nickel Based and Iron Based Amorphous Filler Metal Foil on Plain Carbon Steel Pipe

The Microstructure of Fe-Based Laminated Metal Composite Produced by Powder Metallurgy

Solidification Behavior and Microstructure Evolution in Dissimilar Electron Beam Welds Between Commercially Pure Iron and Nickel

Failure analysis of L415/316L composite pipe welded joint

Evolution of microsegregation-induced precipitations and bending fracture mechanisms of 9% Ni steel weldments filled with nickel-based alloys

Microstructures and homogenization behavior of a nickel-based superalloy used for 850¬Ý‚ÑÉ turbine disc prepared by electron beam smelting layered solidification

Experiment Study of Microstructure Property and Its Control of Submerged Arc Welding Seam of X80 Pipeline Steels