Abstract:Effects of perpendicular tensile loads on the mechanical behavior and biaxial tensile load ratios on stress-strain behaviors of single ply of nylon cord-rubber composite are studied respectively under biaxial tensile conditions employing a cruciform. specimen. Experimental results indicate that transverse mechanical properties of nylon cord-rubber composite with longitudinal constant tensile loads are distinct from its uniaxial transverse tensile mechanical properties. This can be attributed to the action of longitudinal tension that makes the material rigidify in the direction perpendicular to the fiber. The mode of failure is representative of matrix-dominated failure. However, effects of transverse constant tensile load on longitudinal tensile mechanical properties are indistinctive compared with corresponding uniaxial longitudinal tensile mechanical properties. This could be due to a larger difference between longitudinal and transverse mechanical properties. Its dominating failure mode is typical fiber-dominated mode. Effects on biaxial tensile load ratios on its transverse stress-strain behaviors are obvious; whereas, longitudinal stress-strain behaviors under different biaxial tensile load ratios are almost identical. Large differences between longitudinal and transverse tensile properties can be direct reasons resulting in dissimilarities between longitudinal and transverse tensile mechanical behaviors of cord-rubber composite under biaxial tensile loading.

EXPERIMENTAL STUDY OF EFFECTS OF LONGITUDINAL TENSION ON TRANSVERSE TENSILE MECHANICAL PROPERTIES OF NYLON CORD-RUBBER COMPOSITE

Mechanical Properties of Nylon6 Cord-Rubber Composite Subjected to Biaxial Tensile Loads

Influence of Inter-tube Connections on the Stress-Strain Behavior of Nanotube-Polymer Composites: Molecular Dynamics

Study on Viscoelastic Propertiesof Cord–Rubber CompositeSubjected to Biaxial Loading

Experimental study on tension and compression mechanical property of 3D fine woven punctured C/C composites

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Experimental investigation on the fatigue life and damage mechanism of plain weave composites under biaxial tension–torsion combined fatigue loading

Mechanical Behavior of Nylon 66 Tyre Cord under Monotonic and Cyclic Extension: Experiments and Constitutive Modeling

STUDY ON THE THEORY OF STRENGTH OF SHORT FIBER/RUBBER COMPOSITES I PREDICTION OF LONGITUDINAL TENSILE STRENGTH

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Study on Tensile and Compressive Properties and Size Effect of 3D Fine Woven Punctured C/C Composites

Effect of cord construction on the properties of rubber composites

Experimental and numerical study of mechanical properties of filament-wound CFRP tubes

STUDIES ON TENSILE PROPERTIES OF BRAIDED STRUCTURAL COMPOSITE MATERIALS

Some Characteristics of Polymer Cord Reinforced Rubber under Tensile and Compressive Loads

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

Experimental Research on the Multiaxial Fatigue Behavior of Fibre Reinforced Composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Different Effects of Interfacial Properties on the Tensile and Compressive Damage Mechanisms of 3D Woven Composites: Multiscale Damage Model and Numerical Comparative Study

An Experimental Study on the Tensile Mechanical Behavior of Steel Cords for Radial Tires

Investigation on the longitudinal compressive strength of unidirectional carbon fiber/nanoparticles reinforced polymer composites using FFT-based method