Frequency Characteristic Of Thermoacoustic Prime Mover

Ke Tang,Guobang Chen,Yonghua Huang

2003-01-01

Abstract:Resonance frequency of the thermoacoustic prime mover plays an important role in the thermoacoustically driven pulse tube refrigerator. The influences of structure parameters and working fluids on resonance frequency are discussed. With standing wave thermoacoustic engine as an example, corresponding computed results are given.

What problem does this paper attempt to address?

Study on the Performance of a Looped Thermoacoustic Prime Mover With Resistance Tube

Rui YANG,Yi WANG,Ye FENG,Ke TANG,Tao JIN

2017-01-01

Abstract:One key issue for a highly efficient travelling-wave thermoacoustic engine is the acoustic field characterized by near-travelling wave field and high acoustic impedance in the regenerator.A single-stage travelling-wave thermoacoustic prime mover has been designed,including a resistance tube to adjust the acoustic field.Systematic experiments on the onset characteristics and the steady state of the prime mover have been conducted with helium,N2 and CO2 as working fluids,respectively.The results show that the onset temperature of the prime mover can be lowered by more than 300℃ when the resistance tube was introduced into the loop.The lowest heating temperature to initiate the onset is only 55℃,when the working fluid is CO2 and the mean pressure is 2.35 MPa.Besides,the prime mover can be operated with a considerable pressure ratio when the heating temperature is below 200℃.Consequently,the resistance tube can be used as an effective phase adjustor for a looped thermoacoustic prime mover and the system proposed in this work shows a promising potential to utilize low-grade thermal energy.
Lumped Parameter Model for Resonant Frequency Estimation of a Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Ke Tang,Tian Lei,Xiao-gang Lin,Tao Jin,Yu Zhang

DOI: https://doi.org/10.1631/jzus.a1000191

2011-01-01

Abstract:Gas-liquid coupling oscillation is a novel approach to reducing the resonant frequency and to elevating the pressure amplitude of a thermoacoustic engine. If a thermoacoustic engine is used to drive low-frequency pulse tube refrigerators, the frequency matching between the thermoacoustic engine and the refrigerator plays an important role. Based on an acoustic-electric analogy, a lumped parameter model is proposed to estimate the resonant frequency of a standing-wave thermoacoustic engine with gas-liquid coupling oscillation. Furthermore, a simplified lumped parameter model is also developed to reduce the computation complexity. The resonant frequency dependence on the mean pressure, the gas space volume, and the water column length is computed and analyzed. The impact of different working gases on the resonant frequency is also discussed. The effectiveness of the models is validated by comparing the computed results with the experimental data of the gas-liquid coupling oscillation system. An increase in the mean working pressure can lead to a rise in the resonant frequency, and a lower resonant frequency can be achieved by elongating the liquid column. In comparison with nitrogen and argon, carbon dioxide can realize a lower frequency due to a smaller specific heat ratio.
Performance Comparison of Thermoacoustic Engine with Gas-Liquid and Gas Oscillation

TANG Ke,LEI Tian,LIN Xiao-gang,JIN Tao

DOI: https://doi.org/10.3785/j.issn.1008-973x.2011.07.017

2011-01-01

Abstract:A standing-wave thermoacoustic engine with a U-shaped resonant tube was constructed in order to reduce the resonant frequency and increase the pressure ratio.A liquid column was introduced into the U-shaped resonant tube,forming the gas-liquid coupling oscillation with the gas working fluid in the thermoacoustic core.Experiments for performance comparison of the thermoacoustic engine with gas-liquid and mere gas oscillation were constructed with water as the liquid column and with nitrogen and helium as the working gas,respectively.Experimental results indicated that both nitrogen-water and helium-water coupling oscillation systems realized a resonant frequency below 8 Hz,which was obviously lower than that of either nitrogen or helium gas oscillation system.A larger pressure ratio was observed in the gas-liquid coupling oscillation thermoacoustic engine,compared with mere gas system.Relatively lower resonant frequency and larger pressure ratio are advantageous for the performance improvement of thermoacoustically driven pulse tube refrigeration at cryogenic temperature.
Basic Analysis on a Thermoacoustic Engine with Gas and Liquid

Ke Tang,Tian Lei,A. T. A. M. de Waele,Tao Jin

DOI: https://doi.org/10.1063/1.3555088

IF: 2.877

2011-01-01

Journal of Applied Physics

Abstract:This paper analyzes the basics of a thermoacoustic engine with gas and liquid as working fluids. The governing equations for the engine are deduced from the dynamics of each individual component. From the governing equations, analytical expressions are obtained for oscillation frequency and onset temperature. The relations for the dependence of the displacement amplitude of liquid column, the velocity amplitude at the end of resonant tube, the pressure amplitude gradient and the enthalpy flow in stack, on the pressure amplitude in resonant tube are formulated. The calculation with the deduced formulae shows that an oscillation frequency below 10 Hz can be achieved in the thermoacoustic engine with gas and liquid. Meanwhile, a lower oscillation frequency, as well as a lower onset temperature, requires a larger liquid mass and a lower mean pressure. Experiments, focusing on the oscillation frequency and the onset temperature, have been performed to validate the computation.
Thermodynamic Characteristics During the Onset and Damping Processes in a Looped Thermoacoustic Prime Mover

Tao Jin,Rui Yang,Yuanliang Liu,Ke Tang

DOI: https://doi.org/10.1016/j.applthermaleng.2016.02.115

IF: 6.4

2016-01-01

Applied Thermal Engineering

Abstract:The onset and damping processes of self-excited working-fluid oscillation in thermoacoustic prime movers, related to the quality of the utilizable thermal energy, have attracted everlasting research interest and effort. This work is intended to observe and analyze the temperature and pressure characteristics of the onset and damping processes in a recently developed looped travelling-wave thermoacoustic prime mover with enlarged thermoacoustic cores. A hysteretic loop, caused by the discrepancy between the onset temperature difference and the damping temperature difference, can be found in the looped structure, which indicates the potential in decreasing the onset temperature difference. Additionally, in order to optimize the acoustic field in the thermoacoustic prime mover, a compliance unit was inserted into the loop. The experimental results show that the onset temperature difference drops by up to 223 K with the appropriately located compliance unit, which is advantageous to the utilization of low-grade thermal energy. (C) 2016 Elsevier Ltd. All rights reserved.
Experimental Study On A Thermoacoustic Prime Mover

X Bai,T Jin,Gb Chen

1998-01-01

Abstract:The thermoacoustic prime mover is a new type of pressure wave generator based on thermoacoustic effect. With no moving parts, it is a simple, reliable, and longterm nonmaintenance machine. In this paper an experimental thermoacoustic prime mover is introduced. The experimental results are presented. The effect of the-working fluid, resonator length, charging pressure and heating temperature on the performance of the thermoacoustic prime mover is discussed.
Experimental study of a traveling-wave thermoacoustic prime mover

金滔,BRETAGNE Emmanuel,陈国邦,FRANCOIS Maurice-Xavier

DOI: https://doi.org/10.3321/j.issn:0371-0025.2003.04.015

2003-01-01

Abstract:Thermoacoustic prime mover can convert thermal energy into acoustic energy through thermoacoustic effect. It attracts more attention due to the advantages of its lack of moving component, simplicity and stability. Compared with standing-wave thermoacoustic prime mover, the traveling-wave thermoacoustic engine, which is the topic of present experimental study, is considered to be capable of achieving much higher efficiency. The emphasis is made on design and fabrication of an experimental setup of the thermoacoustic-Stirring prime mover. The pressure oscillations of 66 Hz and 23 Hz were obtained, with helium and nitrogen as working fluid respectively. The influences of heating power and heating temperature on pressure amplitude were investigated and the contrast test for before and after installation of jet pump was carried out.
Influence of buffer on resonance frequency of thermoacoustic engine

G.B Chen,J.P Jiang,J.L Shi,T Jin,K Tang,Y.L Jiang,N Jiang,Y.H Huang

DOI: https://doi.org/10.1016/S0011-2275(02)00019-X

IF: 2.134

2002-01-01

Cryogenics

Abstract:Frequency matching is of great importance to a thermoacoustically driven pulse tube refrigeration system. To compute the resonance frequency of thermoacoustic engines, the fluid impedance method is introduced. The calculations of the thermoacoustic engines with different arrangements of buffer have been carried out. The influence of the buffer arrangements and the volume on the resonance frequency as well as the acoustic power of thermoacoustic engines is also discussed.
Effect of Resonance Tube Shape on Performance of Thermoacoustic Engine

X. Li,H. Ling,W. Dai,E. Lou,G. Chen,Y. Chen,K. Tang

DOI: https://doi.org/10.1063/1.2202526

2006-01-01

AIP Conference Proceedings

Abstract:A resonance tube is an important component of a thermoacoustic engine, and the variations of its geometries and dimensions may significantly influence the system performance. This paper reports a series of experimental studies on a standing‐wave thermoacoustic engine with a cone‐shaped resonance tube and a cylindrical one, respectively. The preliminary results show that with almost identical frequency of 130 Hz, pressure ratio, acoustic power output and relative coefficient of performance of the system with the cone‐shaped resonance tube are all higher than those with the cylindrical one. A better performance has been achieved in the thermoacoustic engine with the cone‐shaped resonance tube.
A Thermoacoustic Engine with Gas and Liquid Operating below 10 Hz

Ke Tang,Tian Lei,Tao Jin,Wentao Tang

DOI: https://doi.org/10.2514/6.2011-5575

2011-01-01

Abstract:A thermoacoustic engine operating below 10 Hz, with gas and liquid as the working fluids, is experimentally studied in this paper. The emphasis of measurement and analysis focuses on the impact of liquid column mass, mean operating pressure, gas working fluids, and liquid working fluids on the resonant frequency and the pressure amplitude. Experimental results demonstrate that a remarkable drop of resonant frequency and an increase of pressure amplitude can be realized by introducing a liquid column into a thermoacoustic engine with mere gas working fluid. A larger liquid column mass or a higher mean operating pressure can lead to a higher pressure amplitude. Compared with nitrogen, carbon dioxide and helium, argon seems to be advantageous for achieving a larger pressure amplitude at the same heating power, whereas the carbon dioxide-water system gets the lowest resonant frequency. As to the liquid working fluid, a small viscosity is preferable for elevating the pressure amplitude.
Investigation on phenomena of frequency transition in thermoacoustic system

Shou Lin,Tang Ke,Qiu Yuan,Huang Zhongjie

DOI: https://doi.org/10.3969/j.issn.1000-6516.2007.05.005

IF: 2.134

2007-01-01

Cryogenics

Abstract:Experiments on standing-wave thermoacoustically driven RC load with an acoustic pressure amplifier( APA) have been carried out. The phenomena of frequency transition that is observed in the experiments is concluded and the operating patterns of the standing-wave thermoacoustic system are classified and defined respectively. The range of acoustic resistance in which frequency transition, the relationship between frequency transition and heating power and the relationship between frequency transition and the length of the acoustic pressure amplifier are analyzed and concluded.
Characteristics study on the oscillation onset and damping of a traveling-wave thermoacoustic prime mover

Tao Jin,Chang-song Mao,Ke Tang,Hao Zheng,Guo-bang Chen

DOI: https://doi.org/10.1631/jzus.A0820061

2008-01-01

Abstract:This paper focuses on the temperature and pressure characteristics of a Swift-Backhaus type traveling-wave thermoacoustic prime mover during its onset and damping processes, in order to understand the intrinsic mechanism of thermoacoustic oscillation onset and the feasibility of using low-grade thermal energy based on a low onset temperature. The influences of heat input and filling pressure on hysteretic loop, due to the noncoincidence between onset and damping processes, are measured and analyzed. The condition for the occurrence of hysteresis is also briefly discussed.
Experimental study on miniature thermoacoustic prime mover

Jin Tao,Zhang Baosen,Jia Zhengzhong,Chen Guobang

DOI: https://doi.org/10.3969/j.issn.1000-6516.2006.01.003

IF: 2.134

2006-01-01

Cryogenics

Abstract:To miniaturize thermoacoustic engines is intended for their potential micro-scale usage,and some suggestions had been proposed for further study on the miniaturization of a thermoacoustic prime mover.A miniature thermoacoustic prime mover was built up,and the experiments had been done to observe the influence of structural and operating parameters on the sound amplitude,resonance frequency and onset temperature of the system.The results show that a proper structure can make the present thermoacoustic system start an oscillation at 100 ℃,which makes it possible to be applied as a cooler of some electronic units.The operating frequency mainly depends on the length of system,while the amplitude depends on the heat input and stack position.
Advances in Thermoacoustic Engine and Its Application to Pulse Tube Refrigeration

Guobang Chen,Ke Tang,Tao Jin

DOI: https://doi.org/10.1360/03te0190

2004-01-01

Chinese Science Bulletin

Abstract:Thermoacoustically driven pulse tube refrigerator, a novel cryocooler without any moving components using heat energy as driving power, attracts much effortsfrom the researchers in the field of cryogenics and refrigeration in the past decades. After a short introduction of the history about thermoacoustics, we presented the key technology, followed by a detailed review on theoretical and experimental developments and advances of thermoacoustics.The prospective research emphases are also presented at the end of this review.
Experimental observation on a small-scale thermoacoustic prime mover

Tao Jin,Bao-sen Zhang,Ke Tang,Rui Bao,Guo-bang Chen

DOI: https://doi.org/10.1631/jzus.2007.A0205

2007-01-01

Journal of Zhejiang University SCIENCE

Abstract:A miniature thermoacoustic prime mover, consuming heat to radiate sound, may be considered as a potential way of heat management in microcircuits because of its simplicity and stability. A prototype with variable resonant tube length of 10 to 25 cm was built, and experiments were carried out to observe its performance, such as onset temperature, oscillation amplitude and operating frequency. The results with atmospheric air showed that proper structures and operating conditions can make the system start an oscillation at a temperature lower than 100 °C, which proves the feasibility of potential usage in electronic units. The influences of stack position, heat input power or tube inclination on the oscillation amplitude, onset temperature and operating frequency are also presented.
Influence of resonance tube geometry shape on performance of thermoacoustic engine.

Rui Bao,Guobang Chen,Ke Tang,Zhengzhong Jia,Weihua Cao

DOI: https://doi.org/10.1016/j.ultras.2006.08.005

IF: 4.2

2006-01-01

Ultrasonics

Abstract:Based on the linear thermoacoustics, a symmetrical standing-wave thermoacoustic engine is simulated with a cylindrical tube and a tapered one as the resonance tube, respectively. The experiments with both cylindrical and tapered tubes are carried out. The suppression of nonlinear effects due to tapered tube as the resonance tube is discussed. Both simulation and experimental results show that the performance of the tapered tube is better than cylindrical one as the resonance tube. (c) 2006 Published by Elsevier B.V.
Theoretical prediction on the coupling of thermoacoustic prime mover and RC load

K. Tang,G.B. Chen,Z.Z. Jia,N. Jiang,R. Bao

DOI: https://doi.org/10.1016/b978-008044559-5/50072-7

2005-01-01

Abstract:The coupling of thermoacoustic prime mover and its load is of great importance for the performance of thermoacoustic system. A standing wave thermoacoustic prime mover with RC (resistance and capacitance) load is simulated, and the influence of RC load and dimensions of the resonance tube on the behavior of the thermoacoustic system is discussed according to the computed results.
Discussion on resonant frequency in thermoacoustic systems

T. Jin,L. Fan,B.S. Zhang,B.R. Wang,G.B. Chen

DOI: https://doi.org/10.1016/b978-008044559-5/50088-0

2005-01-01

Abstract:Besides two traditional methods of calculating resonant frequency, a new method referred to as Standing Wave Minimal Antinode Method is proposed, which makes it possible to consider the influence of resistance, since zero antinode is no long a necessity as in an ideal standing wave system. Numerical simulation will be made oil three types of tubes for their resonant frequencies with three methods, focusing on the influences of impedance composition on the resonant frequency. Analysis and comparison will also be made to these three methods.
Performance comparison of thermoacoustic engines with constant-diameter resonant tube and tapered resonant tube

K. Tang,G.B. Chen,T. Jin,R. Bao,X.M. Li

DOI: https://doi.org/10.1016/j.cryogenics.2006.04.006

IF: 2.134

2006-01-01

Cryogenics

Abstract:Two standing-wave thermoacoustic engines with a constant-diameter resonant tube and a tapered one, respectively, are simulated with linear thermoacoustics to explore the reasons for performance improvement of the thermoacoustic engine with the tapered resonant tube substituting for the constant-diameter one. Computed results indicate that the viscous loss in the tapered resonant tube is much lower than that in the constant-diameter one, and the smooth joint between the tapered resonant tube and its resonant cavity may avoid the acoustic power loss derived from sharp variation of flow area. The comparison between the computed results and the experimental data indicates that the simulation can roughly predict the performance of thermoacoustic engines with these two types of resonant tubes.
Influence of load impedance on performance of thermoacoustic engine

TANG Ke,CHEN Guo-bang,BAO Rui,JIA Zheng-zhong

DOI: https://doi.org/10.3785/j.issn.1008-973X.2006.10.027

2006-01-01

Abstract:A standing wave thermoacoustic engine connected with an RC (acoustic resistance and acoustic capacitance) load was simulated with linear thermoacoustics to study the influence of load impedance on the performance of the thermoacoustic engine. Based on the computed results, the effects of the load impedance on pressure amplitude, pressure ratio, velocity amplitude, temperature at the hot end of stack and acoustic power transferred to the load were discussed. Experiments were performed to verify the simulation. The computed and experimental results showed that maximal acoustic power can be transferred to the load when the acoustic resistance of the RC load is equal to its acoustic capacitive impedance. Moreover, a minimal pressure amplitude and a highest temperature at the hot end of stack occur in this case.

Frequency Characteristic Of Thermoacoustic Prime Mover

Study on the Performance of a Looped Thermoacoustic Prime Mover With Resistance Tube

Lumped Parameter Model for Resonant Frequency Estimation of a Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Performance Comparison of Thermoacoustic Engine with Gas-Liquid and Gas Oscillation

Basic Analysis on a Thermoacoustic Engine with Gas and Liquid

Thermodynamic Characteristics During the Onset and Damping Processes in a Looped Thermoacoustic Prime Mover

Experimental Study On A Thermoacoustic Prime Mover

Experimental study of a traveling-wave thermoacoustic prime mover

Influence of buffer on resonance frequency of thermoacoustic engine

Effect of Resonance Tube Shape on Performance of Thermoacoustic Engine

A Thermoacoustic Engine with Gas and Liquid Operating below 10 Hz

Investigation on phenomena of frequency transition in thermoacoustic system

Characteristics study on the oscillation onset and damping of a traveling-wave thermoacoustic prime mover

Experimental study on miniature thermoacoustic prime mover

Advances in Thermoacoustic Engine and Its Application to Pulse Tube Refrigeration

Experimental observation on a small-scale thermoacoustic prime mover

Influence of resonance tube geometry shape on performance of thermoacoustic engine.

Theoretical prediction on the coupling of thermoacoustic prime mover and RC load

Discussion on resonant frequency in thermoacoustic systems

Performance comparison of thermoacoustic engines with constant-diameter resonant tube and tapered resonant tube

Influence of load impedance on performance of thermoacoustic engine