Abstract:In order to further investigate the modification effect of atmospheric pressure plasma jets (APPJ) on the surface of low-density polyethylene (LDPE) film and related mechanisms, a series of experiments and simulations were carried out in this paper. A laminar helium flow with a flow rate of 6.0 standard liters per minute was used as a working gas and a homogeneous glow-like He APPJ was generated by an AC voltage with a peak-to-peak voltage of 10.1 kV and a frequency of 20 kHz. After 15 min He APPJ treatment at a fixed point on the film, the surface properties at different radial positions from this point were analyzed. This study was performed using water contact angle (WCA) measurement, x-ray photoelectron spectroscopy and atomic force microscopy. The results of WCA and surface free energy (SFE) indicate that the modification effect range is larger than APPJ’s spread range on the surface. Along the radial direction, the surface properties did not change monotonously but had extreme points: the change of the surface morphology was first etching and then deposition; APPJ incorporated oxygen containing functional groups including C–O, C=O/O–C–O and O–C=O into the LDPE surface, and their distributions on the surface were different. To explore what caused the difference, quantum chemical simulation analysis by ORCA software was used to explain the relationship between the change of surface energy and oxygen-containing functional groups. The simulation showed that C–O has more influence on the SFE of the LDPE surface.

SPACE CHARGE DISTRIBUTION OF POLYETHYLENE AFTER SURFACE TREATMENT BY PLASMA

Effects of Surface Topography and Morphology on Space Charge Packet in Polyethylene

Space Charge Accumulation in Linear Low-Density Polyethylene with Surface Fluorination of the Semiconductive Electrode

Polypropylene Surface Plasma Modification Using Middle Frequency Power Supply

Effects of Plasma Treatment of Surfaces of Charge Storage in Polypropylene

Charge Transport Property in Polyethylene Investigated by Space Charge Measurement

Experimental Study of Accelerating Surface Charge Dissipation on Polymer Treated by Repetitively Pulsed Discharge Plasmas

Study on space charge in LDPE blended by LLDPE

Effects of Electrode on Space Charge in High-Density Polyethylene

Space Charge Distribution in Polyethylene Due to the Water Diffusion

Space Charge Distribution Analysis in Polyethylene under High Static Pressure

Space charge mechanism of polyethylene and polytetrafluoroethylene by electrode/dielectrics interface study using quantum chemical method

Study on Polystyrene Surface Modification in Dielectric Barrier Discharge

Study on Mechanism of Space Charge in Low Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Progress in the Surface Treatment of PE

Insight into the Effect of He Atmospheric Pressure Plasma Jets on Low-Density Polyethylene Surfaces by Fixed-Point Treatment

Nanoparticle Surface Modification Induced Space Charge Suppression in Linear Low Density Polyethylene

Study of Polypropylene Surface Modified by Dielectric Barrier Discharge

Formation and Inhibition Mechanisms of Space Charges in Direct Current Polyethylene Insulation Explained by Energy Band Theory

Study on Polypropylene Modified by Water Electrode Air Plasma

Space Charge Distribution and Crystalline Structure in Low-Density Polyethylene Modified by Metallocene Catalyzed Polyethylene