Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Study of spot-size converter based on optical tapered planar waveguide

An Optimization Method of the Spot-Size Converter

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Design of a Beam-coupling System for a Chip-integrated Spectrometer with a Discrete Linear Waveguide

Synthetic Subdomain Method for Large-Scale Integrated Optical Waveguides FDTD SImulation

Y-Branch Spot-Size Converter for A Buried Silica Waveguide with Large Index Difference

Efficient Adiabatic Silicon-on-insulator Waveguide Taper

Low Loss, High Extinction Ratio Plasmonic Spot Size Converter

Research on Taper Structure in Planar Waveguide Micro-Spectrometer System Chip

Asymmetric Spp Waveguide Without Sacrificing the Size of Subwavelength Waveguide

On-chip Wavefront Shaping in Spacing-Varied Waveguide Arrays

Design of a Polarization Insensitive Mode-Size Converter Worked at 800 Nm Wavelength with Simple CMOS Process

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Analysis of Polarization-independent Optical Directional Coupler Based on Slot Waveguides for Long-wave Infrared

Ultra-compact spot size converter based on digital metamaterials

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Broadband Frequency Conversion and “area Law” in Tapered Waveguides

Propagation Characteristic Analysis and Applications of Spatial Four-Waveguide System

Novel tapered optical fiber coupler

Topologically-optimized On-Chip Metamaterials for Ultra-Short-range Light Focusing and Mode-Size Conversion

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer