Abstract:<p>Ultralow inter-wall interaction is realized in centimeter-long double-walled carbon nanotube (DWCNT) (Zhang, R. et al. Nat. Nanotech. 8, 912-916 (2013)). To further illustrate the mechanism of this special phenomenon, theoretical analysis combining with the experimental test is conducted, where study of the inter-tube interaction in the carbon nanotube bundles (CNTBs) is also included in this paper. In experiment, nanomanipulation difficulties of the ultra-long carbon nanotube (CNT)/CNTB is overcome by establishing a micro/nanoscale mechanical testing system (m/n-MTS), based on which the inter-wall/inter-tube interaction is firstly in-situ measured under optical microscope (OM). In theory, according to the bottom-up approach, a multi-scale model is developed specially, by which results obtained can be directly compared with the experimental data. The pull-out force consists of three parts: the boundary effect, the configuration force and the dynamic friction. The boundary effect can account for more than 70% when the pull-out velocity equals to 1 μm/s. The configuration force is greatly enhanced for the CNTB because of the commensurate configuration in the circumferential direction. The dynamic friction shows linear dependence on the pull-out velocity and relates to the overlapped area, which can be manifested when the pull-out velocity reaches to a dozen μm/s for the ultra-long DWCNT. The dynamic friction coefficient is proved to be 0.29 multiple of critical value based on the experiment data. The pull-out force in the CNTB is found far less than that in the DWCNT due to the greatly reduced contact area. Moreover, it can be deduced that the dynamic friction will show the same order of magnitude as the contribution from the boundary when the pull-out velocity equals to 10 μm/s or the length is 10 mm. This research reveals the underlying mechanism of the interaction, especially for the dynamic friction force exhibited in the ultra-long CNT/CNTB, and can provide help for designing devices with ultralow friction on macroscale.</p>

Manipulation of Carbon Nanotube Bundles with Contact Mode Atomic Force Microscopy

Manipulation and Cutting of Carbon Nanotubes

Micro-mechanical Analysis of Dynamic Processes of Nanomanipulation

Mechanism-Independent Manipulation of Single-Wall Carbon Nanotubes with Atomic Force Microscopy Tip

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Microscopic Friction in the Manipulation of Carbon Nanotubes

Manufacturing Structures in Nanometer Scale by Nanomanipulation

Strategies for the AFM based manipulation of silver nanowires on a flat surface.

Multi-scale analysis of the interaction in ultra-long carbon nanotubes and bundles

Atomic Force Microscopic Measurement of Lateral Pushing Forces During Nanomanipulation

Manipulation of Ultralong Single-Walled Carbon Nanotubes at Macroscale

Nanorobotic manipulation of carbon nanotubes inside a transimission electron microscope

Assembling Structure of Single-Walled Carbon Nanotube Thin Bundles

Facile manipulation of individual carbon nanotubes assisted by inorganic nanoparticles.

In situ measurements on individual thin carbon nanotubes using nanomanipulators inside a scanning electron microscope

Toward the Chemistry of Carboxylic Single-Walled Carbon Nanotubes by Chemical Force Microscopy

Carbon nanotubes adhesion and nanomechanical behavior from peeling force spectroscopy

Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation

Controlled Growth of a Single Carbon Nanotube on an AFM Probe

Single-Carbon-Nanotube Manipulations and Devices Based on Macroscale Anthracene Flakes

Effects of Tip-Nanotube Interactions on Atomic Force Microscopy Imaging of Carbon Nanotubes