Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Surface modification of polypropylene microporous membrane by plasma and its application for the in situ oligonucleotide synthesis

In situ Synthesis of Oligonucleotides on Plasma Treated Polypropylene Microporous Membrane

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme(I) - Influence of Low-temperature Oxygen Plasma Treatment on Surface Structure and Adsorption Properties of the Affinity Membrane

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Surface modification of PVDF porous membranes by electron irradiation

Surface Modification of Polypropylene Microfiltration Membranes by the Immobilization of Poly(n-Vinyl-2-pyrrolidone): a Facile Plasma Approach

Surface Modification of Polypropylene Microporous Membrane by Tethering Polypeptides

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

Surface modification of polypropylene microporous membrane via self-assembly and UV-crosslinking of lecithin and analysis of surface properties

A Novel Approach for the Surface Modification of Polymeric Membrane with Phospholipid Polymer

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

THE SURFACE TREATMENT OF POROUS POLYPROPYLENE MEMBRANE BY AR PLASMA WITH A LOW POWER

Hydrolysis of microporous polyamide-6 membranes as substrate for in situ synthesis of oligonucleotides

A Novel Substrate for in Situ Synthesis of Oligonucleotides: Hydrolyzed Microporous Polyamide-6 Membrane

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

Surface Modification of Polypropylene Microporous Membranes with a Novel Glycopolymer

Plasma surface modification of polypropylene microfiltration membranes and fouling by BSA dispersion

Graft polymerization of N-isopropylacrylamide into a microporous polyethylene membrane by the plasma method: technique and morphology

Microporous polypropylene hollow fiber membrane Part I. Surface modification by the graft polymerization of acrylic acid