Abstract:This study investigates the physical processes involved in picosecond pulse (20-28 ps FWHM) laser ablation of Al 6061, 316L stainless steel, and undoped crystalline Si (〈100〉) over a range of laser wavelength (355 nm and 1064 nm) and fluence (0.1-40 J/cm2). Experimental measurements of material ablation rate show enhanced removal at the 355 nm wavelength, primarily due to laser-plasma interaction (LPI) within the ablative plume that approaches an order of magnitude increase over the measured removal at 1064 nm. A transition in the ablation rate at 355 nm is identified around ∼10 J/cm2 above which the removal efficiency increases by a factor of two to three. Multi-physics radiation hydrodynamic simulations, considering LPI effects and utilizing a novel mixed-phase equation of state model, show that the transition in ablation efficiency is due to the onset of melt ejection through cavitation, where laser-driven shock heating sets the depth of melt penetration and the ensuing release wave from the ablation surface drives cavitation through the imposition of tensile strain within the melt. High-speed pump-probe imaging of the ejecta and ejecta collection studies, as well as scanning electron microscopy of the ablation craters, support the proposed cavitation mechanism in the higher fluence range. The ablation process is critically influenced by LPI effects and the thermophysical properties of the material.

Ablation of Gan Using A Femtosecond Laser

Laser-Induced Damage Threshold and Surface Processing of Gan at 400 Nm Wavelength

Experimental study of a millimeter-sized Ga-In drop ablated by a nanosecond laser pulse

Ablation characteristics and material removal mechanism of a β-Ga2O3 processed by picosecond laser

Numerical Analysis of Ultrashort Pulse Laser-Induced Thermomechanical Response of Germanium Thin Films

Laser-Induced Damage Threshold and Laser Processing of Gan

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

Ultrafast damage dynamics and ablation mechanism of GaSe induced by femtosecond laser irradiation

Numerical Simulations of Germanium Nanofilm under Femtosecond Pulse Laser Heating

Picosecond Laser Ablation of Millimeter-Wave Subwavelength Structures on Alumina and Sapphire

Theoretical and Experimental Study of Laser Induced Damage on Gaas by Nanosecond Pulsed Irradiation

Integrated Continuum-Atomistic Modeling of Nonthermal Ablation of Gold Nanofilms by Femtosecond Lasers

Low-temperature synthesis of gallium nitride thin films using electron cyclotron resonance plasma assisted pulsed laser deposition from a GaAs target

Gallium nitride wafer slicing by a sub-nanosecond laser: effect of pulse energy and laser shot spacing

Study of the Laser Lift-off Technology of GaN Films from Sapphire Substrates

Periodic surface micro-nanostructures on GaN films induced by femtosecond laser irradiation

Physics of picosecond pulse laser ablation

Laser slicing: a thin film lift-off method for GaN-on-GaN technology

High efficiency femtosecond laser ablation with gigahertz level bursts

Few-cycle optical field breakdown and damage of gallium oxide and gallium nitride

Gallium Nitride Films Synthesized by Reactive Pulsed Laser Deposition from A Gaas Target