Abstract:Cyclic deformation behavior and substructure in single crystal Ti–5at.% Al alloy with different orientations fatigued at Δεt/2=0.4% were examined. The selected loading orientation includes: single prism slip, A; double prism slips [21̄1̄0], B; pyramidal slip, C; and twinning [0001], D. The testing results show that the crystallographic orientation has a strong effect on the cyclic stress response and the plastic deformation mode of Ti–5at.% Al single crystals. The crystals displayed an initial cyclic hardening followed by a striking softening period, and then a saturation stage was reached in specimens A and B. In contrast, an obvious cyclic saturation stage was obtained after first cyclic hardening until to fracture in specimens C and D. Trace analysis on the surface of specimens with an optical microscope shows that the (11̄00) single prism slip was operated in specimen A during cycling. The (101̄0) and (11̄00) double prism slips can be distinguished from the traces on the (0001) surface in specimen B. The (11̄01) pyramidal slip and the (11̄00) prism slip were activated simultaneously in specimen C. Twinning is the primary plastic deformation mode in specimen D. The twinning type includes: {112̄1}, {101̄1}, {112̄2} and {101̄2}. The substructure in the fatigued specimens was examined using TEM. Typical dislocation configuration is well developed saturation bundle structure (SBS) in specimen A, while it is the planar edge dislocations which are tangled on the primary (101̄0) plane and arranged parallel to the [0001] direction in specimen B. Fully developed loop patches were formed in specimen C. Typical deformed structure was the twin bundles and dislocations among twins in specimen D. The effects of plastic deformation mode on the cyclic stress response and the corresponding dislocation configuration of Ti–5at.% Al single crystals are then discussed.

Cyclic Twins in High-Purity Titanium Single Crystals / Zyklische Zwillingsbildung in hochreinen Titan-Einkristallen

Cyclic twins in high-purity titanium single crystals

In situ EBSD study of the twinning deformation behaviors in pure titanium

Microstructure and Microtexture Evolution of Pure Titanium During Single Direction Torsion and Alternating Cyclic Torsion

Shock-induced Two Types of {101¯2} Sequential Twinning in Titanium

Orientation dependence of cyclic deformation behavior and dislocation structure in Ti–5at.% Al single crystals

Crystallographic Characters of {11¯22} Twin-Twin Junctions in Titanium

Twinning behavior in lamellar gamma-TiAl alloy deformed cyclically at room temperature

The Formation of {101̅2} Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

Cyclic deformation behaviour of commercially pure titanium at cryogenic temperature

The Formation of 10 12 Deformation Twin in Hybrid TiB-TiC Reinforced Titanium Matrix Composites

Twinning Behavior and Its Effect on Mechanical Behavior of Commercial Titanium at Cryogenic Temperature

Twinning behavior of orthorhombic-α" martensite in a Ti-7.5Mo alloy

Formation Mechanism of Three-Fold {101¯1}α Twins During Β to Α Phase Transformation in Titanium

Grain Size and Specimen Thickness Effects on Twinning Behaviors in High Strain Rate Deformation of Ultra-Thin Pure Titanium Sheet

Microstructure of Cyclically Deformed Titanium with Low Hydrogen Concentration I. Crystal Rotation and Formation of Cell Structure Near Hydrides

The role of thermal cycling on twinning in metastable beta-Ti alloy

Shear Texture Formation during High-Strain Torsion of Titanium Aluminides

Atomic-scale investigation on the interface structure of {2 2 ̅ 01} α2-Ti3Al deformation twins in polysynthetically twinned TiAl single crystals

Twinning-induced Plasticity Mechanism of a?-martensitic Titanium Alloy

Cyclic deformation behavior and dislocation structure of Ti-2 at. Pct Al single crystals oriented for double prism slip