Abstract:Bi2Te3-based materials are dominating thermoelectrics for almost all of the room-temperature applications. To meet the future demands, both their thermoelectric (TE) and mechanical properties need to be further improved, which are the requisite for efficient TE modules applied in areas such as reliable micro-cooling. The conventional zone melting (ZM) and powder metallurgy (PM) methods fall short in preparing Bi2Te3-based alloys, which have both a highly textured structure for high TE properties and a fine-grained microstructure for high mechanical properties. Herein, a mechanical exfoliation combined with spark plasma sintering (ME-SPS) method is developed to prepare Bi0.5Sb1.5Te3 with highly improved mechanical properties (correlated mainly to the dislocation networks), as well as significantly improved thermoelectric properties (correlated mainly to the texture structure). In the method, both the dislocation density and the orientation factor (F) can be tuned by the sintering pressure. At a sintering pressure of 20 MPa, an exceptional F of up to 0.8 is retained, leading to an excellent power factor of 4.8 mW m-1 K-2 that is much higher than that of the PM polycrystalline. Meanwhile, the method can readily induce high-density dislocations (up to ∼1010 cm-2), improving the mechanical properties and reducing the lattice thermal conductivity as compared to the ZM ingot. In the exfoliated and then sintered (20 MPa) sample, the figure-of-merit ZT = 1.2 (at 350 K), which has increased by about ∼20%, and the compressive strength has also increased by ∼20%, compared to those of the ZM ingot, respectively. These results demonstrate that the ME-SPS method is highly effective in preparing high-performance Bi2Te3-based alloys, which are critical for TE modules in commercial applications at near-room temperature.

Mn15Bi34Te51 and La15Bi34Te51 thermoelectric materials by mechanical alloying

Mechanical alloying boosted SnTe thermoelectrics

Mid-temperature Thermoelectric Performance of Zone-Melted Sb2(Te,Se)3 Alloys Near Phase Transition Boundary

Microstructural Evolution, Thermal Stability and Microhardness of the Nb–Ti–Si-Based Alloy During Mechanical Alloying

Mechanical Alloying Behavior of Nb–Ti–Si-based Alloy Made from Elemental Powders by Ball Milling Process

Atomic Local Ordering and Alloying Effects on the Mg3(Sb1-x Bi X )2 Thermoelectric Material

Achieving High-Performance Ge<sub>0.92</sub>Bi<sub>0.08</sub>Te Thermoelectrics via LaB<sub>6</sub>-Alloying-Induced Band Engineering and Multi-Scale Structure Manipulation

Simultaneously Improved Thermoelectric and Mechanical Properties Driven by MgB2 Doping in Bi0.4Sb1.6Te3 Based Alloys

Flower-like nanostructure and thermoelectric properties of hydrothermally synthesized La-containing Bi2Te3 based alloys

Achieving High‐Performance Ge 0.92 Bi 0.08 Te Thermoelectrics via LaB 6 ‐Alloying‐Induced Band Engineering and Multi‐Scale Structure Manipulation

Microstructure evolution and thermoelectric behaviour of directionally solidified Bi2Te3-Ga2Te3 eutectic alloy

Evolution of Nanometer-Scale Microstructure within Grains and in the Intergranular Region in Thermoelectric Mg3(Sb, Bi)2 Alloys

Enhanced Thermoelectric Performance Through Homogenously Dispersed MnTe Nanoparticles in P-Type Bi0.52Sb1.48Te3 Nanocomposites

Atomic Local Ordering and Alloying Effects on the Mg 3 (Sb 1- x Bi x ) 2 Thermoelectric Material

Compromise of Thermoelectric and Mechanical Properties in LiSbTe2 and LiBiTe2 Alloyed SnTe

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices

Enhancing the Thermoelectric and Mechanical Properties of Bi 0.5 Sb 1.5 Te 3 Modulated by the Texture and Dense Dislocation Networks

Preferential Orientation and Thermoelectric Properties of P-Type Bi0.4Sb1.6Te3 System Alloys by Mechanical Alloying and Equal Channel Angular Extrusion

Nanostructuring and improved performance of ternary Bi–Sb–Te thermoelectric materials

Enhanced Thermoelectric Figure-of-Merit in P-Type Nanostructured Bismuth Antimony Tellurium Alloys Made from Elemental Chunks

Preparation and Properties of Nano-SiC Dispersed Bi2Te3 Thermoelectric Materials