Study on mold filling velocity in AZ91 magnesium alloy LFC process with vacuum

刘子利,吴国华,丁文江,朱燕萍,李强

DOI: https://doi.org/10.3969/j.issn.1005-5053.2002.02.004

2002-01-01

Abstract:Full factorial experiments were carried out to study the effects of vacuum, pouring temperature and pattern thickness on the mold filling velocity in AZ91 magnesium alloy lost foam casting (LFC) process. The results show: All of them play a positive effect on the velocity, and vacuum is a crucial parameter in determining the velocity. Without vacuum, the velocity is very small and continually decreases as the pattern is displaced, the effect of pouring temperature on velocity is minor; when vacuum is applied, the velocity during mold filling process varies greatly and displays indefinitely, and the fluctuation of the changing velocity increases with increasing vacuum, pouring temperature and the pattern thickness. At low vacuum, as vacuum and/or pouring temperature increase, the average velocity increases rapidly, and the interaction effect between vacuum and pouring temperature on the velocity is enhanced; at still higher vacuum, the average velocity increases with increasing pouring temperature all the same, but the average velocity increase rate decreases as vacuum further increases, and the interaction between vacuum and the pouring temperature is insignificant. The effect of pattern thickness on the velocity is somewhat modified under vacuum.