Abstract:Porosity is a major issue in solidification processing of metallic materials. In this work, wedge die casting experiments were designed to investigate the effect of cooling rate on microporosity in an aluminum alloy A356. Microstructure information including dendrites and porosity were measured and observed by optical microscopy and X-ray micro-computed tomography (XMCT). The effects of cooling rate on secondary dendrite arm spacing (SDAS) and porosity were discussed. The relationship between SDAS and cooling rate was established and validated using a mathematical model. Three-dimensional (3-D) porosity information, including porosity percentage, pore volume, and pore number, was determined by XMCT. With the cooling rate decreasing from a lower to a higher position of the wedge die, the observed pore number decreases, the porosity percentage increases, and the equivalent pore radius increases. Sphericity of the pores was discussed as an empirical criterion to distinguish the types of porosity. For different cooling rates, the larger the equivalent pore radius is, the lower the sphericity of the pores. This research suggests that XMCT is a useful tool to provide critical 3-D porosity information for integrated computational materials engineering (ICME) design and process optimization of solidification products.

A New Method for Quickly Locating the Hot Spots in Solidification Simulation of Complicated Castings

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Progress in numerical simulation of solidification process of shaped casting

Numerical Methods to Improve the Computational Efficiency of Solidification Simulation for the Investment Casting Process

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Numerical simulation and experimental verification of the initial temperature distribution of castings during mold filling process

Study on numerical simulation of mold-filling and solidification processes of shaped casting

Numerical and Experimental Study of the Elimination of Shrinkage in Complex and Small Investment Castings Using Water Cooling Process

Numerical simulation of shrinkage porosity defect in billet continuous casting

Criteria for Prediction of Shrinkage Cavities and Porosity in Castings

Progress on Numerical Simulation of Mold Filling and Solidification Processes of Shaped Castings

Study and Application of Mold Filling Simulation of Shaped Castings

Numerical Optimization of Solidification Process for Symmetrical Part Based on Finite Element Modeling

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Zone Partitioning Computation Technique During Solidification Simulation Of Sand Casting Process

Three-dimensional visualization and quantification of microporosity in aluminum castings by X-ray micro-computed tomography

Zone partitioning calculational technique for solidification simulation during sand casting

Progress in Solidification Modeling of Cast Iron in China

Studies on formation of shrinkage cavity and porosity of steel castings by taking filling process into account

Application of Solidification Simulation of Temperature Field in Heavy Steel Castings