Abstract:Four turbulence models: algebraic Bladwin-Lomax model, two versions of Johnson-King model (J-K90A and J-K92) and two-equation k-g model, are described and evaluated for missile supersonic flow, NASA TN D-712 standard mode and the civil airplane wing-body configuration (two-block C-O mesh) transonic flows. We integrate numerically the 3-D compressible Reynolds averaged Navier-Stokes (RANS) equations, with central finite volume method and explicit multi-step Runge-Kutta algorithm. The turbulence equations of k-g model are explicitly solved in the same way as the RANS. The results show that all models could perform well for attached and mildly separated flows. For large angle-of-attack separated flows over the missile, the calculation with k-g and J-K92 models matches the experimental results better than those with B-L and J-K90A models. According to the B-L model with some modification the shock location logs behind those with the other three models for the civil airplane geometry. Model k-g, because of its advantages such as no use of normal-to-wall distance, simple source terms and straightforward boundary conditions, performs best in the four models for complex configuration with multi-block mesh system or multi-wall interference. B-L and J-K models, despite of cheapness and robustness, both base on empirical Prandtl mixing-length hypothesis and need to calculate the distance normal to the wall, undoubtedly limit the applications scope of these models for multi-block mesh system and complex geometry.

Comparison of Predictive Capabilities of Three Turbulent Models

On Applying Four Turbulence Models to Numerical Simulation of Flow for Wing-Body Configuration

Comparisons of Different Implementations of Turbulence Modelling in Lattice Boltzmann Method

Application of Turbulence Models in Simulation of Complex Flow-Fields

Application of simplified threeGequation transition model in hypersonic flow

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Numerical Simulation for Transonic Flows at High Incidence Around a Complete Fighter with Two-Equation K-G Model

Assessing The Predictive Capabilities Of Several Rans Turbulent Models For Flow In Consecutive Reverse Bends

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Comparison study of turbulence models in numerical simulation of multi-jets impinging injectors

Comparison of different turbulence models in computation of co-axial jet stream of Texaco gasifier

Numerical Simulation of Separated Flows over Slender Body at High-Angle-of-attack with K-Ε Model Comforming Realizability

Numerical Investigation of Transonic Axial Compressor Rotor Flows Using an Improved Transition-Sensitized Turbulence Model

The Simulation of Shock/Boundary Interaction Flows with Several Temporal and Spatial Schemes

A Modular RANS Approach for Modeling Hypersonic Flow Transition on an Air-Breathing Configuration

TURBULENT FLOW SIMULATION AND PERFORMANCES PREDICTION ON THE KAPLAN TURBINE MODEL WITH OPEN CASING

Cyclone Separator Three-Dimensional Turbulent Flow-Field Simulation Using the Reynolds Stress Model

Comparison of Turbulence Models in Simulation of Plane Jet Flow

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Numerical Investigation on Ultra-High-lift Low-Pressure Turbine Cascade Aerodynamics at Low Reynolds Numbers Using Transition-Based Turbulence Models