Abstract:Laser powder bed fusion (LPBF) is of great importance for the visual measurement and analysis of the metallization process, which is the process of solid, liquid, and gas phase transformations of metal powders under high-energy laser irradiation due to the low boiling point/high saturated vapor pressure. Since the evaporation of metals involves the interaction of driving forces such as vapor back pressure, surface tension, and gravity, the movement of the melt pool is not stable. At the same time, it also produces vaporization products such as vapor plumes and sprays, which cause defects such as bubbles, porosity, lack of fusion, inclusions, etc., during the manufacturing process of the parts, affecting the performance and manufacturing quality of the parts. More and more researchers are using imaging technologies, such as high-speed X-ray, high-speed visible light cameras, and high-speed schlieren imaging, to perform noncontact visual measurements and analyses of the melt pool, vapor plume, and spatter during the metal evaporation process, and the results show that the metal evaporation process can be suppressed by optimizing the process parameters and changing the processing atmosphere, thereby reducing part defects and improving part performance and built part quality. This paper reviews the research on metal evaporation mechanisms and visual measurement methods of metal evaporation, then discusses the measures of metal evaporation, and finally summarizes and prospects the future research hotspots of LPBF technology, according to the existing scholars' research on numerical simulation analysis and visual measurement methods of the metal evaporation process.

New Method for the Measurement of Vaporized Metal Atomic Flux Distribution

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Real-time measurement of 2-D density flux distribution of atomic vapor in vacuum chamber by laser fluorescence

Measurement of atomic vapor traverse velocity and velocity distribution using laser induced fluorescence

Real-Time Trace Detection of Vapor Phase Elemental Mercury and Its Compounds

Advances in Atomic Vapor Laser Isotope Separation Process——(Ⅱ): Experiment

The Effect of Atoms Excited by Electron Beam on Metal Evaporation

Observation of the Metallic Vapor from a Plasma Focus

Laser Ablation Atomic Beam Apparatus with Time-Sliced Velocity Map Imaging for Studying State-to-State Metal Reaction Dynamics

Absolute measurement of vacuum ultraviolet fluxes from inductively coupled plasmas via metal surface photoemission currents

Measurement of the Transmission Efficiency of He-Jet Laser Time-Of-Flight Mass Spectrometer

Review of Visual Measurement Methods for Metal Vaporization Processes in Laser Powder Bed Fusion

Sub-parts-per-quadrillion-level graphite furnace atomic absorption spectrophotometry based on laser wave mixing

Determination of Se, Pb, and Sb by Atomic Fluorescence Spectrometry Using a New Flameless, Dielectric Barrier Discharge Atomizer

Measurement of DC and AC electric fields inside an atomic vapor cell with wall-integrated electrodes

Direct Monte Carlo simulation of metal evaporation in vacuum chambers

Self-corrected sensors based on atomic absorption spectroscopy for atom flux measurements in molecular beam epitaxy

Observation of the Metallic Vapor from a Plasma Focus with a Laser Differential Interferometer

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

A novel method measuring orifice conductance and testing time-of-flight mass spectrometer for water vapor-binary gas

Measuring Fluence Distribution Of Intense Short Laser Based On The Radiochromic Effect