Abstract:The characterization of straightness/coaxiality is a fundamental geometric tolerance in modern mechanical industries. Straightness measurement over a long range is difficult to implement due to atmospheric disturbance. A novel straightness/coaxiality measurement system that combines a transverse Zeeman dual-frequency laser with a pair of Wollaston prisms is presented in this paper. Orthogonally linearly polarized light from the laser output is divided into two beams by a Wollaston prism, which simultaneously acts as a sensor to measure the straightness of a guideway. The two beams become parallel to each other when they pass through the other Wollaston prism and then are reflected by a rectangular reflector. The measuring signals are processed by means of a phase measurement method with a resolution of 0.1°, which corresponds to 1 µm in straightness measurement. The system meets the principle of self-adaptation so that it is capable of overcoming disturbances in the air. It also has the advantages of compact structure, long-range measurement and good stability. Possible errors of the system are analysed theoretically. A calibration experiment of the straightness measurement over a range of 16 m demonstrated high accuracy with a stability of 3.6 µm.

High precision roll angle interferometer

Measurement Method of the Roll Angle

Measuring Roll Angle Displacement Based on Ellipticity with High Resolution and Large Range

Roll Angle Interferometer by Means of Wave Plates

Roll angle measurement based on common path compensation principle

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Research on high-speed and non-contact angle detection based on laser measurement

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Novel Method to Simultaneously Measure the Straightness

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

Angle Measurement Based on Orthogonally Polarized Lasers

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

High-precision dynamic measurement of roll angle based on digital holography

Sensitivity Enhanced Roll Angle Measurement

A Novel Method of Rolling Angle Measurement

Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser