Abstract:Aiming at researching and developing new compounded suspensions to sever as electrorheological fluid (ERF), a metal core/polymer coating compounded suspension for ERF has been designed according to the principle of media polarization. Based on this evolution, a series of metal core/high polymer coating compounded particles such as Zn/poly-styrene-butyl-acrylate compounded particles, Ni/poly-styrene-butyl-acrylate compounded particles, Ni/polystyrene compounded particles, Zn/polystyrene compounded particles have been prepared adopting the emulsion polymerization together with the micro-encapsulation techniques as well as the acid-alkali matching theory which was initially suggested by Fowkes (schematically depicted in Fig, 1). The micro-morphologies of these compounded particles were measured using scan electron microscophy (the SEM photography of Fig. 2 exhibits the coated condition of these particles) and the ERF performance of these compounded particles have alse been carried out. The performance test results indicate that the mechanical properties (refer to Fig. 5 similar to 10) and the stability of ERF were improved, i.e. shear strength was no less than 2 kPa and segregation resistance was intensified significantly compared with that of metal core, which shows that these materials are promising for acting as ERF though further modification should be necessary. Besides, from the performance test results it is apparently found that different compounded suspensions made up of different metal cores or polymer coatings possess various mechanical properties, and explanations for this phenomenon will discussed in detail elsewhere.

Preparation and Performance of Metal Core/High Polymer Coating Micron-Spheres Compounded-Suspension of Electrorheological Fluid

Metal Core/Polymer Coating Compounded Suspension for Electrorheologic Fluid

Design and Preparation of A Kind Metal/P (Mma-Maa) Erf

Electrorheological Fluids of Coated Microspheres

Conducting Material-incorporated Electrorheological Fluids: Core-shell Structured Spheres

Preparation and Characterization of Inorganic-Polymeric Magnetic Composite Nanospheres

Hollow Poly(ionic liquid)/alpha-Al2O3 Composite Particles Prepared by Microwave-Assisted Pickering Emulsion Polymerization and Their Electrorheological Polishing Property

Electrorheological Characteristics of Poly(diphenylamine)/magnetite Composite-Based Suspension

Polymer Modification of Ultrafine Metal Iron Particles and Magnetorheological Properties of Their Suspensions

Composites of Co-Doped Graphitic C3N4 Nanosheets and TiO2 Nanoparticles for Electrorheological Fluid Applications

A Facile Electrostatic Spraying Method to Prepare Polyvinylpyrrolidone Modified TiO2 Particles with Improved Electrorheological Effect

Rheological behavior of particle-filled polymer suspensions and its influence on surface structure of the coated electrodes

Research on a Novel Conductive Micro-sphere for Anisotropic Conductive Film

Preparation of Electric and Magnetic Ps@Ni@Cu Core-Shell Microspheres for Anisotropic Conductive Films

Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films

Preparation and electrorheological behavior of flower-like microparticles

Exfoliation and Functionalization of Α-Zirconium Phosphate in One Pot for Waterborne Epoxy Coatings with Enhanced Anticorrosion Performance

Core-shell structured carbonyl iron microspheres prepared via dual-step functionality coatings and their magnetorheological response

Hollow Poly(ionic liquid)/α-Al<sub>2</sub>O<sub>3</sub> Composite Particles Prepared by Microwave-Assisted Pickering Emulsion Polymerization and Their Electrorheological Polishing Property

Preparation and Electrorheological Property of Alkaline Earth Metal Compounds Modified Amorphous TiO2 Electrorheological Fluid

Monodispers and Multifunctional Magnetic Composite Core Shell Microspheres for Demulsification Applications