Abstract:As a attractive smart material, Electrorheological (ER) fluid has been researched for many years. The main problems in conventional ER fluids are low shear stress, sedimentation and narrow temperature range. This limits the commercial application of the ER fluids and the development of the ER devices. Recent years, some new ER fluids with good mechanical properties have been developed such as synthetic polymers, polyaniline, polyurethane and other organic/inorganic composite particles as the disperse phases in the host liquid. In this paper, a type of water-free electrorheological material of titania with Ce and Y composite doping has been synthesized by a sol-gel technique. After the sols are obtained chemically, the gels are formed when the sols are aged for several hours at room temperature, the gels are dried at 70 degrees C for 8 h, the solid gels are milled into powder, then these solid particles are heated to remove all organic components in the particles and ensure that rutile titania is formed. Finally, the particles are dispersed in damping oil to form the ER fluid. Crystal structure of the particles are characterised with XRD. SEM image of the specimens is obtained by a Hitachi-570 scanning electron microscope operating at 18kV with Au sprayed on the samples prior to examination. Conductivities of the particles are measured from a two-probe method using compressed disks. Prior to mix with the damping oil, the particles are dried for 12 hours at 120 degrees C. Volume fraction of the particles in the damping oil is 0.30. The rheological properties of the ER fluid are measured by a Couette-typt rheometer with a 2mm gap between the bob and the cup under shear rate of 2.11-136s(-1) and DC electric fields of 0-3kV/mm. The experiment results show that the shear stress of the ER fluid increases with the increasing of the electric field and exhibits a typical Bingham flow behaviours. The shear stress of 17kPa at 3 kV/mm can be induced when 6.5mol% Ce and Y is doped, while the current density is less than 5 mu A/cm(2). The shear stress has a significant dependence upon the amount of Ce and Y, then the amount of reaction reagents and pH value in the solution system. A large mismatch of permittivity and conductivity plays an important role in enhancing ER effects of the ER fluid. Moreover, some additives such as dispersing agents, coupling agents are added in the ER suspension in order to improve the dispersibility of the particles in oil. These surface active agents also provide for a low zero-field viscosity and yield stress which is advantageous for devices having the largest possible dynamic range to be built.

Metal Core/Polymer Coating Compounded Suspension for Electrorheologic Fluid

Preparation and Performance of Metal Core/High Polymer Coating Micron-Spheres Compounded-Suspension of Electrorheological Fluid

Electrorheological Fluids of Coated Microspheres

Design and Preparation of A Kind Metal/P (Mma-Maa) Erf

Electrorheological Characteristics of Poly(diphenylamine)/magnetite Composite-Based Suspension

Electrorheological Properties of Titania Particle with Ce and Y Composite Doping As an Anhydrous Er Fluid

Conducting Material-incorporated Electrorheological Fluids: Core-shell Structured Spheres

Polymer Modification of Ultrafine Metal Iron Particles and Magnetorheological Properties of Their Suspensions

The Electrorheological Effect and Dielectric Properties of Suspensions Containing Polyaniline@titania Nanocable-Like Particles

High Performance Magnetorheological Fluids with Flower-Like Cobalt Particles

Properties and Structure of Ni/Tio2/Polar Molecule Core-Shell Particles Electrorheological Fluid

Polar-molecules-driven Enhanced Colloidal Electrostatic Interactions and Their Applications in Achieving High Active Electrorheological Materials

New Electrorheological Fluid: Theory and Experiment

Er Fluid Based on Inorganic/Polymer Blend Particles and Its Adaptive Viscoelastic Properties

The Giant Electrorheological Effect in Suspensions of Nanoparticles

Core/shell Nanocomposite Based on the Local Polarization and Its Electrorheological Behavior.

Electrorheology of Nanofiber Suspensions

Core-Shell-Structured Electrorheological Fluid with a Polarizability-Tunable Nanocarbon Shell for Enhanced Stimuli-Responsive Activity

Microstructured Particles for Electrorheological Applications

Enhancing Compressive Strength of Electrorheological Fluid by Patterning the Electrode

Rheological behavior of particle-filled polymer suspensions and its influence on surface structure of the coated electrodes