Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Mach-Zehnder Interferometer Thermo-Optical Modulator with Fast Response

SOI Thermo-Optic Modulator with Fast Response

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Design and Performance of a Polymer Mach-Zehnder Interferometer Electro-Optic Modulator at 1.55 Μm

Highly Efficient Silicon Michelson Interferometer Modulators

Fast thermo-optical modulators with doped-silicon heaters operating at 2 mu m (vol 29, 23508, 2021)

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

High-speed Mid-infrared Silicon-based Electro-optic Modulator at 2 Μm

Ratiometric Wavelength Monitor Based on Mach-Zehnder Interferometer over a 80 nm Wavelength Range

High-speed, low-loss silicon Mach-Zehnder modulators with doping optimization.

Design and Electro-Optical Co-Optimization of High-Speed Travelling Wave Silicon-Organic Hybrid Modulators

High speed silicon Mach-Zehnder modulator based on interleaved PN junctions.

SOI Based Optical Waveguide Devices with 44gbit/s High Speed

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

High-speed Silicon Modulators for the 2 Μm Wavelength Band

0.52 V mm ITO-based Mach-Zehnder modulator in silicon photonics

Nanosecond Polymer Mach-Zehnder Interferometer Electro-Optic Modulator Using Optimized Micro-Strip Line Electrode

Mach–Zehnder-Based Four-Port Switching Module on SOI

All-fiber modulator derived from the large-transverse-offset Mach-Zehnder interferometer coated with ITO