Abstract:Toner preparation process and the resin composition control in suspension polymerization were researched for improving the application properties of the toner. Bulk polymerization process of styrene was studied in the presence of carbon black, iron black pigments and ultrasonic action, respectively. Experimental results showed that the ultrasonic effect on the bulk polymerization of styrene can be divided into three stages. In the earlier stage, the polymerization was accelerated due to the remarkable effect of ultrasonic polymerization. In the middle stage, the polymerization was retarded due to the decomposition effect of ultrasonic on polymerized resin. In the later stage, the ultrasonic polymerization was accelerated remarkably again due to the high viscosity of reactant slurry. Non-reactive surface of the iron black particles speeded polymerization for its hindering termination of chain radicals, and with the increase of adding amount of iron black, the accelerating function was more remarkable. Adding low amount of carbon black accelerated the polymerization, while adding large amount resulted in hindering the polymerization of styrene. Because the resin characteristics in toner affect the fixation quality crucially in printing process, the effect of reaction temperature, the amount of initiator and pigments of carbon black and iron black on the average molecular weight and its distribution, softening point and melt index were studied in this research. The average molecular weight and the polydispersity (ratio of weight average molecular weight to number average), softening point and melt index were employed as characterization parameters. Research results showed that increasing the reaction temperature or the initiator amount, the resin molecular weight decreases, the softening point decreases and the melt index increases. Adding carbon black results in the decrease of molecular weight, which results from that the active functional groups on the surface of carbon black can trap the chain radical. Adding iron black retards coupling termination, and polymer resin with higher molecular weight and wider distribution forms, which leads to that the softening point increases and the melt index decreases. Therefore, the resin properties can be controlled through the adjustment of parameters in the suspension polymerization process.

Tailoring Resin Properties of In-situ Suspension Polymerized Toner

Preparation Process and Resin Properties Control of the Toner in Suspension Polymerization

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Particle Size Distribution And Morphology Of In Situ Suspension Polymerized Toner

Particle Size Distribution And Morphology Of Suspension Polymerized Mono-Component Magnetic Toner

Tailoring the Performance of Polymer Composites Via Altering the Properties of the Intrapore Polymers of MCM-48 Nanocomposites As Fillers

Silicone-modified Phenolic Resin: Relationships Between Molecular Structure and Curing Behavior

Designing an optimised formulation for in situ emulsion polymerization: printing ink production by response surface methodology

Encapsulation of Carbon Nanotubes by Styrene and Butyl Acrylate Particles via Suspension Polymerization for Polymerized Toner Applications

Tuning of ultraviolet‐curable ink printability via in situ ultraviolet irradiation during direct ink write applications

Facile Tailoring of Thermal Transition Temperatures of Epoxy Shape Memory Polymers

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Optimization of Vat-Polymerization binder formulation for 3D printing ceramic slurry using D-optimal mixture experimental design

Tuning the microstructure and rheological properties of MXene-polymer composite ink by interaction control

Phase-Separation Dominating Mechanical Properties Of A Novel Tung-Oil-Based Thermosetting Polymer

Evaluating Processing Parameter Effects on Polymer Grades and Plastic Coloring: Insights from Experimental Design and Characterization Studies

Matching Low Viscosity with Enhanced Conductivity in Vat Photopolymerization 3D Printing: Disparity in the Electric and Rheological Percolation Thresholds of Carbon-Based Nanofillers Is Controlled by the Matrix Type and Filler Dispersion

Properties Optimization of Polypropylene/Montmorillonite Nanocomposite Drawn Fibers

Tuning the Static and Dynamic Properties of Epoxy Vitrimers through Modulation of Cross-Link Density

A Comparative Study on 3D Printed Silicone-Epoxy/acrylate Hybrid Polymers Via Pure Photopolymerization and Dual-Curing Mechanisms

Color Tuning Via Adjusting the Dye-Loading Capacity of a Polymer