Abstract:An efficient optimal algorithm, named SAA-PA in brief, based on the simulated annealing algorithm (SAA) and the Powell algorithm (PA) for the PCF-based Raman amplifiers (PCF-RA) design has been applied for the first time, in order to achieve the flat Raman gain characteristics. The pump spectra (wavelengths and powers) have been optimized to achieve low gain ripple (GR) over C+L band. The PCF considered to study the RA has the following parameters: Lambda=4 mu m, d/Lambda=0.625, Sixty signals (1540-1600 nm) spaced at 1 nm are launched to the PCF of 10-km length with an input power of -10 dBm/ch. Various pump wavelengths and power distributions have been considered with the aim to reduce the gain ripple as much as possible. Simulation results show that the lowest GR of 0.72 dB with a peak gain of 8.03 dB in an 10 km ULL-PCF can be attained over C+L band. Also, it has been easily found that, when the gain and bandwidth are approximately the same, the lowest GR decreases with the addition of pump number, i.e., the GR are 1.27, 1.11, 0.85, and 0.72 dB for 3, 4, 5, and 6 backward pumps, respectively. All this shows that PCF is an appropriate candidate for high gain Raman amplifier.

Realization and Optimal Design Optimizing of Broadband Raman +EDFA Hybrid Amplifiers

A Flattening Gain Raman Amplifier Involved Only 2 Cascaded FBG Based Multi-Wavelength Pumps

Design of Raman-Parametric Fiber Amplifier for Wavelength Division Multiplex Transmission System

A Broadband High-Efficiency Quasi Class E Internally-matched GaN Power Amplifier with a Compact Band-Pass Output Matching Structure

Design of Raman amplifier with high flat gain in broad band using genetic algorithm

Optimal Design Algorithm for Bi-Directionally Pumped Raman Amplifiers

Optimal Design and Analysis of Broadband Fiber Raman Amplifier

A Class-F Based Power Amplifier with Optimized Efficiency in Triple-Band

Design and Optimization of a Milli-Meter Wave Amplifier Using Nano-Scale CMOS Devices

Efficient Algorithm and Optimization for Broadband Raman Amplifiers

Optimal Bandwidth For Distributed Multi-Pump Raman Amplifier Based On Hybrid Genetic Algorithm

High Gain, Low Noise, Spectral-Gain-Controlled, Broadband Lumped Fiber Raman Amplifier

Optimal Design Of Flattened Gain Spectrum Of Raman Amplifiers Based On Photonic Crystal Fibers

Ultra-flat and Broadband Two-Pump Optical Parametric Amplifiers Using a Single-Section Highly Nonlinear Fiber

Design Gain Characteristic Of Dual-Pump Fiber Raman Amplifier

Raman pumps power distribution optimization for maximum overall gain and flatness of a hybrid SOA/EDFA/Raman optical amplifier

Parameters Optimization of High Efficiency Discrete Raman Fiber Amplifier by Using the Coupled Steady-State Equations

Raman and erbium-doped fiber amplifiers hybrid bidirectional optical amplifier with low noise figure for fiber-optic radio frequency synchronization

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

Optimizing the Bandwidth and Noise Performance of Distributed Multi-Pump Raman Amplifiers

Optimal Design for Bidirectionally Pumped Raman Transmission Systems