Abstract:Three-dimensional molecular dynamics (MD) simulations have been performed to investigate behaviors of nanoindentation and nano-scratch. The first case concerns the effects of material defect on the nanoindentation of nickel thin film. The defect is modeled by a spherical void embedded in the substrate and located under the surface of indentation. The simulation results reveal that compared to the case without defect, the presence of the void softens the material and allows for larger indentation depth at a given load. MD simulations are then performed for nano-scratch of single crystal copper, with emphasis on the effect of indenter shape (sharp and blunt) on the substrate deformation. The results show that the blunt indenter causes larger deformation region and much more dislocations at both the indentation and scratch stages. It is also found that during the scratching stage the blunt indenter results in larger chip volume in front of the indenter and gives rise to more friction than the sharp indenter. The scope of the simulations has been extended by introducing a multiscale model which couples MD simulations with Finite Element Method (FEM), and multiscale simulations are performed for two-dimensional nanoindentation of copper. The model has been validated by well-consistent load-depth curves obtained from both multiscale and full MD simulations, and by good continuity of deformation observed in the handshake region. The simulations also reveal that indenter radius and indentation velocity significantly affect the nanoindentation behavior. By use of multiscale method, the system size to be explored can be greatly expanded without increasing much computational cost.

3D Simulation of the Micro Indentation Process and Relative Problems Research

Multiscale Simulation Of Wedge Nanoindentation Based On The Repulsive Force-Field Approach

0701 Molecular Dynamics Simulation of Nano-Contact Between a Diamond Cutting Tool and a Copper Surface

Computational Simulations of Micro-Indentation Tests Using Gradient Plasticity

The Effect of Indenter Angle on the Microindentation Hardness

THEORETICAL METHODS ON NANOINDENTATION

Numerical and Experimental Studies of Deep Indentation on Single Crystals

Modeling Effect of Surface Roughness on Nanoindentation Tests

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

The Influence of Indenter Tip Radius on the Micro-Indentation Hardness

A Nano-Indentation Model for Spherical Indenters

Quantitative Study of Roughness Effect in Nanoindentation on AISI316L Based on Simulation and Experiment

Influence of Indenter Tip Roundness on Hardness Behavior in Nanoindentation

A Numerical Study of Indentation with Small Spherical Indenters

Molecular Dynamics And Multiscale Simulations Of Nanoindentation And Nanoscratch

Simulation of Deep Spherical Indentation Using Eulerian Finite Element Methods

Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation

Microhardness Variation with Indentation Depth for Body-Centered Cubic Steels Pertinent to Grain Size and Ferrite Content

An elastic-plastic indentation model for different geometric indenters and its applications

Square indentation on a soft elastomer layer with finite thickness

Numerical modeling of Vickers indentation on polycrystalline alumina