Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps
Peng Zhen,Jin Xiaojun,Mo Shiming,Zhang Wei,Xu Zhaobin,Jin Zhonghe
DOI: https://doi.org/10.16708/j.cnki.1000-758X.2020.0074
2020-01-01
Chinese space science and technology
Abstract:In view of the shortcomings of traditional calibration methods and the differential GPS based post-calibration method for ground-based TT&C systems, a real-time calibration method based on satellite-to-ground differential GPS was proposed. Compared with the differential GPS based post-calibration method, the real-time calibration method enables the ground-based TT&C systems to obtain the calibrated measurement data in time to carry out orbit determination and prediction in real time and to timely inject the orbit parameters to improve the operational performance of the satellite. In view of the long baseline, high dynamic and real-time satellite-to-ground calibration scenario, all kinds of errors affecting the performance of satellite-to-ground baseline estimation and the correction effectiveness of these errors were systematically analyzed, and the concept of relative position dilution precision was proposed, thus obtaining the accuracy budget of satellite-to-ground baseline estimation. A robust adaptive Kalman filter algorithm was used as the real-time satellite-to-ground baseline estimation algorithm, and a weighted least square method was employed to solve the real-time measurement error of the ground-based TT&C system, so as to obtain the calibration results. A hardware-in-the-loop simulation platform was established by using spaceborne dual frequency GPS receivers and a navigation signal simulator. The simulation results show that, after real-time calibration, the residual ranging error of the TT&C system is reduced to about 40 cm, and the residual velocity measurement error is reduced to less than 1 cm/s, which is consistent with the theoretical analysis, and can well meet the requirements of future space missions.