A Study of a Modification Method to Improve the Display Nonuniformity of Cold Emission Source

K Wang,SZ Deng,NS Xu

DOI: https://doi.org/10.1109/ivmc.2001.939720

2001-01-01

Abstract:A new method is developed in order to sustain the display uniformity field emission displays (FED). This method uses an electric technique to solve the problem of nonuniformity in FEDs

What problem does this paper attempt to address?

Enhancing the performance of fluorescence emission difference microscopy using beam modulation

Shuai Li,Cuifang Kuang,Xiang Hao,Yifan Wang,Jianhong Ge,Xü Liu

DOI: https://doi.org/10.1088/2040-8978/15/12/125708

IF: 2.1

2013-01-01

Journal of Optics

Abstract:Fluorescence emission difference microscopy (FED) has been proved to be an effective method to break the diffraction barrier which had restricted the spatial resolution of optical microscopy in the far-field for a long time. In this paper, we theoretically demonstrate that the attainable resolution of FED can be further enhanced by using beam modulation. By applying beam shape modulating, polarization state modulating, phase encoding and beam blocking to the illumination beams in the process of FED imaging, we optimize the size of the corresponding PSFs and thus improve the resolving ability of FED. The simulation tests demonstrate that in the optimal case after beam modulation, the resolution of FED can be enhanced by a factor of 26% compared with a conventional one.
Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

梁宜勇,顾征,孙戎,顾智企,尚学府,马燕萍,王鲲

DOI: https://doi.org/10.3969/j.issn.1005-9490.2008.01.004

2008-01-01

Abstract:By using PDP (plasma display panel) characteristics of self-luminescence, thin structure, high brightness and uniform luminescence, a novel surface lamp-house based on PDP technology was developed to apply in a special space which needs thin illuminator. To overcome PDP'S shortage of low luminous ef- ficiency, many important modifications are accomplished in panel structure, phosphors material, working gas, manufacturing process and drive circuit. The improved surface lamp-house has parameters as follows.thickness less than 4 ram, luminance more than 350 cd/m2, color temperature 6500 K and luminous effi-ciency 4 lm/w. The study result of surface light source PDP will help to improve the photoelectric proper-ties of image PDP.
A Study on Correction Systemic Algorithm for LCD Projection Display Color Uniformity

Zhang Yi,Liu Xu,Li Haifeng

DOI: https://doi.org/10.1016/j.phpro.2012.05.250

2012-01-01

Physics Procedia

Abstract:According to the application of two-dimensional CCD camera and the computer composing principles and characteristics of uniformity correction system of LCD projection display color, this paper experiments, analyzes and compares the process of seeking color correction value between improved binary algorithm and traditional stepping technique. The experimental results indicate that, compared with traditional stepping technique, the advantage of improved binary algorithm lies in the fact that it has universal adaptability and can be applied to the color uniformity correction of LCD projection system with various optical properties; besides, it has uniform convergence as to the search of correction value in different areas in the process of correction, which enables the correction time of the projection system to be a constant; what's more, in comparison with stepping technique, improved binary algorithm has a higher algorithmic efficiency with the same precision and its correction time reduces to 60% of the stepping technique. The related experiment shows that improved binary algorithm is the ideal algorithm that appropriate to be applied in the display color uniformity correction of LCD projection system.
Eliminating deformations in fluorescence emission difference microscopy.

Shangting You,Cuifang Kuang,Zihao Rong,Xu Liu

DOI: https://doi.org/10.1364/OE.22.026375

IF: 3.8

2014-01-01

Optics Express

Abstract:We propose a method for eliminating the deformations in fluorescence emission difference microscopy (FED). Due to excessive subtraction, negative values are inevitable in the original FED method, giving rise to deformations. We propose modulating the beam to generate an extended solid focal spot and a hollow focal spot. Negative image values can be avoided by using these two types of excitation spots in FED imaging. Hence, deformations are eliminated, and the signal-to-noise ratio is improved. In deformation-free imaging, the resolution is higher than that of confocal imaging by 32%. Compared to standard FED imaging with the same level of deformations, our method provides superior resolution. (C) 2014 Optical Society of America
Super-Resolution Microscopy Based on Fluorescence Emission Difference of Cylindrical Vector Beams

Zihao Rong,Cuifang Kuang,Yue Fang,Guangyuan Zhao,Yingke Xu,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2015.05.057

IF: 2.4

2015-01-01

Optics Communications

Abstract:We propose a novel fluorescence emission difference microscopy (FED) system based on focusing cylindrical vector beams. In conventional FED, a Gaussian beam and a 0–2π vortex phase plate are used to generate solid and hollow spots. We focus radially polarized and azimuthally polarized cylindrical vector beams to obtain an expanded solid spot and a shrunken hollow spot, taking advantage of the optical properties of cylindrical vector beams to improve the conventional FED performance. Our novel method enhances FED performance because the hollow spot size determines the FED resolution and an expanded solid spot effectively reduces negative side-lobe emergence during image processing. We demonstrate improved performance theoretically and experimentally using an in-house built FED. Our FED achieved resolution of less than λ/4 in test images of 100nm nanoparticles, better than the confocal image resolution by a factor of approximately 1/3. We also discuss detailed simulation analyses and FED imaging of biological cells.
Emission Difference Super-Resolution Microscopy with Optical Lattices Scanning and Wide Field Detection

Dazhao Zhu,Youhua Chen,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2016.03.052

IF: 2.4

2017-01-01

Optics Communications

Abstract:A parallel scanning method using optical lattices is proposed theoretically to improve the imaging speed of fluorescence emission difference microscopy (FED), which gives the wide field imaging capability to FED while maintaining all the basic advantages of single point FED. The basic principle of wide field FED (wfFED) is presented briefly and the method of generating optical lattices is discussed. The resolution via two types of optical lattices pattern scanning is also studied. With optical lattices scanning, which is generated by two orthogonally crossed standing waves, the wfFED can be implemented without wide field excitation. This strategy can further improve the wfFED imaging speed and simplify the set-up.
Fluorescence Emission Difference Microscopy Based on Polarization Modulation

Wanjie Dong,Yuran Huang,Zhimin Zhang,Liang Xu,Cuifang Kuang,Xiang Hao,Liangcai Cao,Xu Liu

DOI: https://doi.org/10.1142/s1793545822500341

IF: 2.396

2022-01-01

Journal of Innovative Optical Health Sciences

Abstract:In this paper, we propose a new fluorescence emission difference microscopy (FED) technique based on polarization modulation. An electro-optical modulator (EOM) is used to switch the excitation beam between the horizontal and vertical polarization states at a high frequency, which leads to solid- and donut-shaped beams after spatial light modulation. Experiment on the fluorescent nanoparticles demonstrates that the proposed method can achieve [Formula: see text] spatial resolution. Using the proposed system, the dynamic imaging of subcellular structures in living cells over time is achieved.
Progress in the Study on Field Emission Display Technology

XU Zheng,ZHAO Hui,YANG Sheng-yi,XU Xiu-lai

DOI: https://doi.org/10.3969/j.issn.1001-5868.1999.03.001

1999-01-01

Abstract:In this paper, the development of field emission display(FED) technology is reviewed, followed by discussion on the structure of FED and its display mechanism.Emphasis is put mainly on the progress in recent two years in such areas as the modification of the materials,the improvement of device life-time and its structure,and the trial production of the sample devices.
Study of Preparation of Low Voltage Cathodoluminescent Phosphor and Application on Field Emission Display Screen

YY Dai,SZ Deng,YL Ke,J Chen,NS Xu

DOI: https://doi.org/10.1109/ivmc.2003.1223098

2003-01-01

Abstract:Summary form only given. High efficiency low-voltage cathodoluminescent phosphor is one of the key materials in developing field emission displays. High brightness, high resolution and fine images of phosphor screen are related to the size of phosphor particles and the layer thickness in the screen. Low voltage phosphor powder for field emission display (FED) has been triturated to super small grains, after special treatment, the phosphors are deposited onto the anode screen of FED devices, with printing method, the phosphor powder was made up to different phosphor thin films with varied thickness. SEM was employed to observe the phosphor particles and the phosphor thin films. Experiments have been carried out on analyzing the different characters of the cathodoluminescence of the treated low voltage phosphor and its phosphor screen.
P‐98: A Novel Dynamic Resolution Improvement Method for Surface‐Conduction Electron‐Emitter Display

Sheng-Li Wu,Ling-Guo Zhao,Si-Liang Xiong,Xiao-Ning Zhang,Jin-Tao Zhang,Ning Yang

DOI: https://doi.org/10.1889/1.3256591

2009-01-01

Abstract:A novel dynamic resolution improvement method for surface-conduction electron-emitter display (SED) has been proposed in this paper. By alternating the polarity of control voltage, the landing positions of the emission electrons on the phosphor plate can be controlled. This helps to accomplish a double dynamic resolution on the conventional electron emission cell array.
Improving Field-Emission Uniformity of Large-Area W18O49 Nanowire Films by Electrical Treatment

Z. L. Li,Fei Liu,N. S. Xu,Jun Chen,S. Z. Deng

DOI: https://doi.org/10.1116/1.3263257

2009-01-01

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena

Abstract:W 18 O 49 nanowires exhibit stable field emission at low fields. To explore the potential application of such nanowires in backlight and display devices, it is necessary to achieve uniform emission on a large area. In the present study, the authors demonstrate that field-emission uniformity of large-area samples may be improved by following an electrical-current treatment procedure. This is due to the increase in the number of nanowires that join in the field emission during the process, in which a small number of strong emitters are gradually melted down. The process of self-melting occurring in field emission is studied using a point anode in situ with a scanning electron microscope. The self-melting is attributed to the effect of Joule heating occurring due to passing of current through field electron emitting nanowires. These results are useful for the device application of W18O49 nanowires as large-area cold cathodes.
P2&#x2013;19: A Scheme of Uniformity Measuring for Flat Plane Cold Cathode

Lei Qin,Shaozhi Deng,Ning Xu,Jun Chen

DOI: https://doi.org/10.1109/ivnc.2010.5563149

2010-01-01

Abstract:A luminance-based method was proposed for the emission uniformity characterization of the flat plane cold cathode. A research of relating to new parameters redefining, testing and evaluating was introduced. A comparison was also taken in this paper with the current method.
Optimization Of Field Emission Properties Of Gated Cuo Nanowire Field Emitter Arrays For Field Emission Display Application

Yuxiang Chen,Xiuyao Lin,Gengxing Liu,Jun Chen,Shaozhi Deng,Ningsheng Xu

2011-01-01

Abstract:The field emission properties of a planar-gated cupric oxide (CuO) nanowire field emitters arrays for emission display (FED) application have been optimized. To protect the cathode electrode from oxidation, Al thin film is introduced on the Cr electrode. Furthermore, a selective wet etching process to remove the Al layer is used before the cathode preparation in order to improve the back-contact of CuO nanowire field emitters. The results show that the field emission properties including uniformity and maximum current of the CuO nanowires in the gated device structure were dramatically improved.
Performance Study Of Field Emission Backlight Unit And Display

Tailiang Guo,Yun Ye,He Lin,Xiaojing Xiao,Chunyan Hong

2011-01-01

Abstract:This paper presented the performance results of a planar field emission backlight unit (FE-BLU) based on carbon nanotubes (CNT) and field emission display (FED) on low work function (LWF) cathode. The morphology and field emission property of CNT were investigated. The FE-BLU and FED were fabricated by screen-printing CNT or LWF cathode and phosphor anode on glass substrate and then sintering and sealing. The good emission uniformity and stability of fabricated FE-BLU and FED was obtained, and They showed high brightness of 3200 cd/m(2) and 400 cd/m(2), respectively.
Measurement on Emitting Characteristics of FED Phosphor and Practical Measure Apparatus

AN Ji-yu,DENG Chao,SUN Tie-zheng

DOI: https://doi.org/10.3969/j.issn.1007-2780.2009.04.027

2009-01-01

Chinese Journal of Liquid Crystals and Displays

Abstract:A measurement scheme for field emission display(FED)materials was provided,and a test equipment was designed to test the luminescence properties and temperature characteristics of the phosphor powder.Furthermore,the instrument could also be used for the life test of the phosphor powder because it could generate great excitation power.The data and results of the FED materials in the experiment were presented,and these experimental data and analysis could provide a foundation for the design of the FED apparatus,to make the important parameters be satisfied.
A Field Emission Display Based on Double-Gated Driving Scheme for Quasi-One Dimensional Nanoemitters

Jie Luo,Jun Chen,Yu Zhang,J. X. Huang,Z. L. Li,S. Z. Deng,N. S. Xu

DOI: https://doi.org/10.1109/ivnc.2007.4480996

2007-01-01

Abstract:Field emission display (FED) has been drawing continuous attention from industry and academic community. Attempts have been made to search for proper FED structure candidate for various nanoemitters which have been explored recently (Choi et al., 1999). To extend the possibility of applications of many newly found quasi-one dimensional nanoemitters material in FED, as well as to achieve high luminance, a device structure with double-gate driving scheme was proposed and tested. With this double-gate driving principle, patternless nanoemitters material, deposited on virtually any substrates, can be incorporated into FED application.
The Uniformity Properties of Diode Structure Field Emission Display Matrix

H Ren,SZ Deng,J Chen,NS Xu

DOI: https://doi.org/10.1109/ivmc.2003.1223092

2003-01-01

Abstract:Summary form only given. In this paper, we researched the uniformity properties of diode filed emission display matrix. The diode field emission display structure was prepared by screen-printing and vacuum coating technology. Matrix points are formed at the intersection of cathode and anode stripes. Emission currents and images were tested in the d.c. mode and pulse mode. For improving the emission uniformity and stability, we modified the cathode structure based on electric field analysis. Due to the electrical fields are strongly enhanced at the edges of the electrode, narrower carbon nanotube emitter stripes were printed only on one edges of the cathode electrodes, and insulated barrier walls with same height were close printed at the same edge of the emitter stripes. This structure could improve the vertical emission and limit the sidelong emission because of edge field effect. We also introduced plasma etching treatment to modify the surface morphology and improve the field emission properties. A diode field emission display devices with 30×30 matrix showed a stable image. The emission uniformity and stability was improved.
Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

J. B. Liu,Jun Chen,N. S. Xu,S. Z. Deng,J. C. She

DOI: https://doi.org/10.1016/j.ultramic.2008.11.001

IF: 2.994

2009-01-01

Ultramicroscopy

Abstract:A carbon nanotube (CNT) composite cold cathode was studied for field emission display application. The CNT composite cold cathode was composed of CNTs and silicon dioxide binder. Field emission from CNT composite cold cathode with different CNT contents was studied. It was found that with increase in CNT contents, the threshold field decreased. The conductance of the composite cathode was measured and with increasing CNT content, there was a critical CNT content where the conductance increased several orders of magnitude. Plasma etching using SF(6) as the etchant was adopted to treat the cathode. Improvement in emission uniformity was achieved. It was also found that after post-treatment the threshold field of the cathode decreased. The morphology of the etched cathode was analyzed and the improvement of uniformity and lowering of the threshold field was attributed to the exposure of CNTs after etching.
A Method to Improve Big Area Field Emission Competence of Carbon Nanotube

倪小静,夏姣贞,顾征

DOI: https://doi.org/10.3969/j.issn.1007-4252.2009.05.019

2009-01-01

Abstract:Carbon nanotube(CNT)possesses favorable field emission characteristic. Studies indicate that carbon nanotube present along perpendicular orientation have better field emission competence than other orientation. In this paper, a method to make carbon nanotube present along perpendicular orientation on big area was depicted. Through testing relative parameters, we study improving field emission competence, as well as estimating field strength factor. This method is meaningful to deposit big screen field emission display(FED).
Method for Improving the Performance of Wide Screen Projection Display Illumination System

Jie Zhou,Yuxiang Lin,Ping Zhou,Haifeng Li,Xu Liu

DOI: https://doi.org/10.3321/j.issn:0253-2239.2005.02.018

2005-01-01

Acta Optica Sinica

Abstract:Illumination system is an important component of projection display system, and decides the brightness and uniformity of the whole system. Fly-eye system is a commonly used illumination configuration. In traditional fly-eye illumination systems, the elemental lens of fly-eye always has the same aspect ratio as the LCD device. But when applied to wide screen projection systems, this will lead to a certain energy loss. This paper presents a new method for improving the performance of wide screen projection display illumination systems, which introduces cylinder lenses. With these cylinder lenses, fly-eye lenses of normal aspect ratio can be utilized in the novel wide screen illumination system. Result of simulation shows that a total increment of about 5% to 10% of the output lumens is available with this improved system.

A Study of a Modification Method to Improve the Display Nonuniformity of Cold Emission Source

Enhancing the performance of fluorescence emission difference microscopy using beam modulation

Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

A Study on Correction Systemic Algorithm for LCD Projection Display Color Uniformity

Eliminating deformations in fluorescence emission difference microscopy.

Super-Resolution Microscopy Based on Fluorescence Emission Difference of Cylindrical Vector Beams

Emission Difference Super-Resolution Microscopy with Optical Lattices Scanning and Wide Field Detection

Fluorescence Emission Difference Microscopy Based on Polarization Modulation

Progress in the Study on Field Emission Display Technology

Study of Preparation of Low Voltage Cathodoluminescent Phosphor and Application on Field Emission Display Screen

P‐98: A Novel Dynamic Resolution Improvement Method for Surface‐Conduction Electron‐Emitter Display

Improving Field-Emission Uniformity of Large-Area W18O49 Nanowire Films by Electrical Treatment

P2&amp;#x2013;19: A Scheme of Uniformity Measuring for Flat Plane Cold Cathode

Optimization Of Field Emission Properties Of Gated Cuo Nanowire Field Emitter Arrays For Field Emission Display Application

Performance Study Of Field Emission Backlight Unit And Display

Measurement on Emitting Characteristics of FED Phosphor and Practical Measure Apparatus

A Field Emission Display Based on Double-Gated Driving Scheme for Quasi-One Dimensional Nanoemitters

The Uniformity Properties of Diode Structure Field Emission Display Matrix

Achieving Uniform Field Emission from Carbon Nanotube Composite Cold Cathode with Different Carbon Nanotube Contents: Effects of Conductance and Plasma Treatment

A Method to Improve Big Area Field Emission Competence of Carbon Nanotube

Method for Improving the Performance of Wide Screen Projection Display Illumination System

P2–19: A Scheme of Uniformity Measuring for Flat Plane Cold Cathode