Experimental and numerical study on strength of high-strength steel double-V butt-welded joint
Wen-Yu Cai,Yan-Bo Wang,Guo-Qiang Li
DOI: https://doi.org/10.1016/j.jcsr.2022.107397
IF: 4.349
2022-09-01
Journal of Constructional Steel Research
Abstract:Compared with normal-strength steel butt-welded joint, high-strength steel butt-welded joint has more complicated mechanical properties due to the presence of four different zones with various material properties after welding, including hardened heat-affected zone (HHAZ), softened heat-affected zone (SHAZ), welding material zone (WM), and base metal zone (BM). However, due to the small size of these zones, it is difficult to identify their material properties and their effects on the performance of the high-strength steel butt-welded joint using the conventional experimental approach. In this research, by performing tension tests on the round notched and flat grooved tension specimens, the material properties of HHAZ, SHAZ, WM, and BM within the double-V butt-welded joint made of Q550, Q690, and Q890 steels and their strength-matching welding materials were first experimentally studied for given heat input of 1.5 kJ/mm achieved by automatic welding method. The true stress-strain models of the different zones were then developed using these test data together with the numerical analysis results. The developed true stress-strain models were validated by the test results of high-strength steel double-V butt-welded joints with different geometries. Finally, the generalized true stress-strain model of high-strength steel double-V butt-welded joints was proposed considering the effect of the strength of each zone for given heat input. According to this research, for given heat input, the strength of the high-strength steel double-V butt-welded joint was deteriorated by SHAZ; however, due to the effect of constraint from HHAZ, the strength of the joints was larger than the strength of SHAZ.
construction & building technology,engineering, civil