Abstract:Metal matrix composites is a new type of engineering materials with broad prospects. The strengthening effect of microstructure of matrix is one of main strengthening mechanisms, and it has been widely studied by theoretical analysis [1‐3]. However, the experimental study on the actual property of matrix of composite has been less reported. In this paper, the technique of X-ray diffraction was used to measure the effective bearing of matrix in composite, and the relation between stress and strain of matrix of a 20vol%SiCw/Al composite was determined for the purpose to study the actual properties of matrix in composite. The experimental material is a squeeze casting 20vol%SiCw/Al composite. The length and diameter of whisker is 5‐15 µm and 0.2‐1 µm, respectively. The matrix material is a 99.8wt%%Al pure aluminum. In addition, the pure aluminum material was selected to compare with the composite. The dimension of sample is: length 50 mm, thickness 2 mm and effective width 6 mm. The geometrical relation in X-ray stress measurement is shown in Fig. 1. The surface of sample should be etched by 20%NaOH solution with 100 µm of thickness to relieve the effect of machining layer near surface in the process of stress measurement. The tensile tests were carried out in the horizontal mechanical equipment, and the direction of tensile strain was along the direction of Y-axis of Fig. 1. The strains along this direction of sample were measured using the strain gage. With the X-300 type of X-ray stress analyzer, the effective bearing stresses of matrix in composite during tensile deformation were determined. The matrix bears the triaxial stress when the composite is applied a uniaxial stress [4‐6], and the effective bearing stress of matrix is the key-factor to lead the plastic strain of matrix in composite. The effective bearing stress of matrix in composite in Fig. 1 can be expressed as [6]:

Thermal Mismatch Stress in Sic Whisker Reinforced Aluminium Composite: New Measurement Method by X-Ray Diffraction

A GENERAL APPROACH TO THE MEASUREMENT OF THERMAL RESIDUAL STRAINS AND STRESSES IN SiCw/Al COMPOSITES

Thermal expansion and thermal mismatch stress relaxation behaviors of SiC whisker reinforced aluminum composite

Determination of the relation between stress and strain of matrix in SiCw/Al composite by X-ray diffraction

Quantitative determination of the stability of SiC whisker in reaction-bonded/hot-pressed Si3N4 composites by X-ray diffraction

Investigation of high-temperature deformation behavior of a SiC whisker reinforced 6061 aluminium composite

The effect of whisker misalignment on the hot compressive deformation behavior of SiCw/6061 Al composites at 500°C

The relaxation behavior of thermal stress in a SiCw/Al composite

Thermo-Mechanical Fatigue of a SiC<SUB>W</SUB>/6061Al Composite

Compressive Stress-Strain Response of Directionally Aligned Sicw/Al Composite

Interfacial Microstructure and Fracture Behavior of SiC Whisker Reinforced Magnesium Matrix Composites

Thermal Residual Stress and Its Modification in a SiC-Whisker/Mg Composite

Hot Compressive Deformation Behaviour of Aluminium Matrix Composites with Misaligned SiC Whiskers

Effects of Thermal Residual Stress Creeping on Microstructure and Tensile Properties of SiC Whisker Reinforced Aluminum Matrix Composite

In situ transmission electron microscopy observation of the initiation and growth of microcracks in an SiC whiskerAl composite

Dimensional Stability And Thermal Stress Of 6061ai/Sicw Composite During Thermal Cycles

STUDY ON THE RELATIONSHIP BETWEEN THERMAL EXPANSION BEHAVIOR AND INTERNAL STRESSES OF AN SiC WHISKER REINFORCED COMPOSITE

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

EFFECTS OF HEAT TREATMENT ON THE THERMAL EXPANSION BEHAVIOR OF SiC WHISKER REINFORCED ALUMINUM COMPOSITE

Thermal Residual Strain in Silicon Carbide Whisker Reinforced Aluminium-Matrix Composite

The Effect of Residual Stress on Whisker Reinforcements in SiCw-Al2O3 Composites During Cooling