Abstract:It's acknowledged that the inferior toughness of bismaleimide resin (BMI) is the crucial problem hindering its development and application especially in aerospace, mechanical and electronic fields. While the poor fire safety of toughened BMI is another problem urgently needed to be resolved. Therefore a novel g-C3N4@PPZ hierarchical architecture constituted of porous g-C3N4 tubes modified by polyphosphazene was designed and fabricated to improve the fire safety and mechanical properties of BMI in this work. Especially compared to pure BMI, the peak heat release rate (PHRR) and peak smoke production rate (PSPR) of BMI with an incorporation of 2 wt% g-C3N4@PPZ (BMI/g-C3N4@PPZ2.0) are at 246.3 kW/m2 and 0.12 m2/s accompanying with 52.1% and 53.8% reduction respectively. The total heat release (THR) and total smoke production (TSP) of BMI/g-C3N4@PPZ2.0 are endowed with reductions of 29.4% and 42.9% as well, which demonstrates that the fire safety including heat and smoke hazards of BMI/g-C3N4@PPZ2.0 is significantly improved. With regard to the mechanical performance of BMI composites, the impact strength of BMI/g-C3N4@PPZ1.5 is 18.89 kJ/m2 which increases by 184.0% in comparison with that of pure BMI resin (6.65 kJ/m2). And it's found that the impact strength of BMI/g-C3N4@PPZ are still higher than pure BMI in hot-humid environment, which signifies that the BMI/g-C3N4@PPZ would be preferred in the industrial applications. Meantime the possible flame retardant and toughening mechanism of g-C3N4@PPZ in BMI is detailed investigated and proposed as well.

Toughness and Hot/Wet Properties of A Novel Modified Bmi/Carbon Fiber Composite

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Influence of Composition on the Properties of BMI Neat Resins and BMI/T300 Composites

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Studies of modified bismaleimide resins Part I The influence of resin composition on thermal and impact properties

Anti-high Speed Impact Properties of Carbon Fiber/bismaleimide Resin Composites

The Preforming of an Interlaminar Toughened Carbon Fiber/Bismaleimide Resin Composite by a Benzoxazine-Based Tackifier

Discussion of compression strength after impact (CAI) of BMI/carbon fiber composites

Fabricating advanced MXene-based hybrid materials to elevate fire safety and mechanical strength in carbon fiber-reinforced bismaleimide resins

Interlaminar Mechanical Properties and Toughening Mechanism of Highly Thermally Stable Composite Modified by Polyacrylonitrile Nanofiber Films

TGACharacterization of Multidirectional Carbon-nanotube-yarn/bismaleimide Laminates Under Tensile Loading

Improved Microhardness and Microtribological Properties of Bismaleimide Nanocomposites Obtained by Enhancing Interfacial Interaction Through Carbon Nanotube Functionalization

Preparation and Characterization of Bismaleimide-Resin-Based Composite Materials

Construction of porous g-C<sub>3</sub>N<sub>4</sub>@PPZ tubes for high performance BMI resin with enhanced fire safety and toughness

Organo-Montmorillonite Modified Bismaleimide as Matrix in Carbon Fibre-Reinforced Composites

Construction of porous g-C3N4@PPZ tubes for high performance BMI resin with enhanced fire safety and toughness

Characterization on fatigue behavior and damage mechanism of C/BMI composites experienced thermal cycling

Hygrothermal mechanical properties of domestic carbon fiber/bismaleimide resin composites for aviation application

Impact Resistance Study of Three-Dimensional Orthogonal Carbon Fibers/BMI Resin Woven Composites

CARBON FIBERS AND INTERFACIAL PROPERTIES OF THEIR REINFORCED RESIN MATRIX COMPOSITES

Characterization of Mechanical, Electrical and Thermal Properties of Bismaleimide Resins Based on Different Branched Structures