Abstract:Al matrix composite, reinforced with the in situ synthesized 3C–SiC, MgAl2O4, and MgO grains, was produced via the casting process using phenolic resin pyrolysis products in flash mode. The contents and microstructure of the composites’ fracture characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Mechanical properties were tested by universal testing machine. Owing to the strong propulsion formed in turbulent flow in the pyrolysis process, nano-ceramic grains were formed in the resin pyrolysis process and simultaneously were homogeneously scattered in the alloy matrix. Thermodynamic calculation supported that the gas products, as carbon and oxygen sources, had a different chemical activity on in situ growth. In addition, ceramic (3C–SiC, MgAl2O4, and MgO) grains have discrepant contents. Resin pyrolysis in the molten alloy decreased oxide slag but increased pores in the alloy matrix. Tensile strength (142.6 ± 3.5 MPa) had no change due to the cooperative action of increased pores and fine grains; the bending and compression strength was increasing under increased contents of ceramic grains; the maximum bending strength was 378.2 MPa in 1.5% resin-added samples; and the maximum compression strength was 299.4 MPa. Lath-shaped Si was the primary effect factor of mechanical properties. The failure mechanism was controlled by transcrystalline rupture mechanism. We explain that the effects of the ceramic grains formed in the hot process at the condition of the resin exist in mold or other accessory materials. Meanwhile, a novel ceramic-reinforced Al matrix was provided. The organic gas was an excellent source of carbon, nitrogen, and oxygen to in situ ceramic grains in Al alloy.

Ceramic matrix composite synthesized by the pure Al+NaOH self-oxidation

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Self Growth Mode of Al2O3/Al Ceramic Matrix Composite Made by Directed Metal Oxidation

Mechanical Properties of Al Matrix Composite Enhanced by In Situ Formed SiC, MgAl2O4, and MgO via Casting Process

Preparation, Oxidation Property and Mechanism of Si3N4/O′-SiAlON Composite Ceramics

Investigation on NiAl–TiC–Al2O3 Composite Prepared by Self-Propagation High Temperature Synthesis with Hot Extrusion

Copper Matrix Composites Reinforced with Nanometer Alumina Particle

A Novel Microstructural Evolution Model for Growth of Ultra-Fine Al2O3 Oxides from SiO2 Silica Ceramic Decomposition during Self-Propagated High-Temperature Synthesis

Preparation of Al2O3/SiC/Ni/Al-Si ceramic matrix composites with multi-phase vague interface by oxidation of molten aluminum alloys

Preparation of Self-Coating Al2O3 Bonded SiAlON Porous Ceramics Using Aluminum Dross and Silicon Solid Waste under Ambient Air Atmosphere

Improved Oxidation Resistance Properties of Si 3 N 4 /o′–sialon Composite Ceramics by a Repeated Sintering Method

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Study of the AlON-VN Composite Ceramic

Microstructure and Mechanical Properties of SiAlON Ceramics with Porous Structure

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Mechanical Properties and Microstructure of Al2o3/Mullite Composite

Fabrication and Properties of CaAl12O19-Al2O3 Composite Ceramics

Preparation and Characterization of An All Oxide Ceramic Matrix Composite by A Novel Method

The Structural Evolutions and Enhanced Thermal Stability of Al Cation-Modified Silicon Oxycarbide Ceramics

Microstructure Evolution and Mechanical Properties of Ni3al/Al2o3 Composite During Self-Propagation High-Temperature Synthesis and Hot Extrusion

FORMATION OF COMPOSITE MATERIAL OF METAL/TWO-PHASE CERAMIC WITH VAGUE INTERFACE BY IN SITU OXIDATION OF MOLTEN ALUMINUM ALLOY