Abstract:In present study Fe(Al, Ta)/Fe2Ta(Al) eutectic composites were prepared using the electron beam floating zone melting directional solidification technique. The compression and fracture toughness properties of Fe(Al, Ta)/Fe2Ta(Al) eutectic composites at different solidification rates were studied with compression and three‐point bending experiments. The toughening mechanism of the material was also analyzed from morphology, composition and microstructure. The results show that the yield strength and compression properties of the Fe(Al, Ta)/Fe2Ta(Al) eutectic composite are increased with the increase of the solidification rate. The room temperature fracture toughness reaches 30.5 MPa·m1/2 when the solidification rate is 4 mm/min. In addition, the material exhibits high strength performance at room temperature. However, it exhibits poor strength and excellent plasticity due to the softening effect of recrystallization at 600°C. The toughening mechanism of the Fe(Al, Ta)/Fe2Ta(Al) eutectic composites can be summarized as crack blunting, crack branching, crack deflection, and local deformation. This article is protected by copyright. All rights reserved.

Effect of iron morphology and interfacial bonding on the toughening of Al2O3/Fe composites

Effect of Interfacial Bonding on the Toughening of Al 2 O 3 /ni Ceramic Matrix Composites

Influence of Toughening Method on Microstructures and Mechanical Properties of Alumina-Matrix Composites

Preparation and mechanical properties of Fe3Al/Al2O3 nano-/micro-composite

Fabrication and Microstructure of in Situ Toughened Al2o3/Fe3al

Microstructure and mechanical properties of Fe-Al-intermetallic compounds/Al2O3 composites manufactured by hot pressing

Fabrication and Properties of Fe3Al Nano-Particle Toughening Al2O3 Matrix Composites

Microstructures and Toughening Mechanisms of Alumina-Matrix Composites

Mechanical properties and microstructure of Fe-Al/Al2O3 composite with Cr, Mo and Ti

High strength and high fracture toughness ceramic−iron aluminide (Fe3Al) composites

Microstructure and Mechanical Properties of High Strength Al2o3p/6061al Composites

Thermal Shock Behaviour of Alumina-Iron Composites

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

Microstructure and Mechanical Properties of Ni-MF/Al2O3 Multiphase Ceramic

Design of Al Based Composites Reinforced with In–situ Al2O3, AlB2 and Al13Fe4 Particles

Effect of Particle Size and Morphology on Microstructure and Properties of Al2O3p/Al Composites

Toughening mechanism of alumina-matrix ceramic composites with the addition of AlTiC master alloys and ZrO2

Properties of Hot-Pressed Al2O3-Fe Composites

Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe2Ta (Al) Eutectic Composites

Toughening mechanisms in iron-containing hydroxyapatite/titanium composites

Influence of Heterogeneous Microstructure on the Tensile Properties of (al2o3+alb2)/al Composites