Abstract:A coupled boundary element method (BEM) and finite difference method (FDM) are applied to solve conjugate heat transfer problem of a three-dimensional air-cooled turbine blade. A loosely coupled strategy is adopted, in which each set of field equations is solved to provide boundary conditions for the other. In the fluid region, computation code (HIT-NS CODE) adopts the FDM to solve the Navier-Stokes equations. In the solid region, the BEM is adopted to resolve the conduction heat transfer equations. An iterated convergence criterion is the continuity of temperature and heat flux at the fluid-solid interface. The solid heat transfer computation code (3D-BEM CODE) is validated by comparing with the results of an analytic solution and the results of commercial code, the results from 3D-BEM CODE have a good agreement with the analytic solution and commercial code results. The BEM uses a weighted residual method to make the Laplace equation convert into a surface integral equation and the surface integral equation is discretized. The BEM avoids the complicated mesh needed in other computation methods and saves the computation time. In addition, the BEM has the characteristic of a combination of an analytic and a discrete solution. So the BEM solutions of heat conduction problems are more accurate. The results of the coupling computation code (HIT-NS-3DBEM CODE) have a good agreement with the experimental results. The adiabatic condition result is different from the results of experiment and code calculation. So the results from conjugate heat transfer analysis are more accurate and they are closer to realistic thermal environment of turbines. Four turbulence models arc applied: K-epsilon model, K-omega model, K-omega (SST-Gamma Theta) model, and B-L model adopted by computation code. Different turbulence models gives different the results of vane wall temperature. Comparing the four turbulence models, the different turbulence models can exactly simulate the flow field, but they can not give exact values for the heat conduction simulation in the boundary layer. The result of K-Omega (SST-Gamma Theta) turbulence model is closer to the experimental data.

Numerical computation on blade channel radiation in engine

Calculation of the Radiation Heat Transfer in Cylinder of Diesel Engine by the Monte-Carlo Method

Numerical computed methods for intake manifolds in gasoline engine

Coupled Bem And Fdm Conjugate Analysis Of A Three-Dimensional Air-Cooled Turbine Vane

Numerical Simulation and Experimental Study on Radiation Heat Transfer in Flame Tube

A Numerical Study of Radiative Heat Transfer in a Cylindrical Furnace by Using Finite Volume Method

Bem/Fdm Conjugate Heat Transfer Analysis of A Two-Dimensional Air-Cooled Turbine Blade Boundary Layer

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor

Effect of Radiation on Heat Transfer Inside Aeroengine Compressor Rotors

Numerical Simulation of Conjugate Heat Transfer in Turbine Blade with Air Cooling

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical Simulation of Hot Gas Velocity Distribution in the Top Dome of an Internal Combustion Hot Stove

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Numerical Simulation of High Temperature Transpiration Cooling in Cylindrical Porous Channels

NUMERIAL SIMULATION OF TURBINE BLADE INTERNAL AND EXTERNAL HEAT TRANSFER WITH THE MULTI-LAYER COUPLING METHOD

The Application of a Radiation Discrete Transfer Method for the Radiation Heat Transfer Calculation of a Three-dimensional Cylindrical Cavity Body

Numerical Study Of Impingement And Film Composite Cooling On Blade Leading Edge

Numerical simulation on the convective heat transfer of compressive gas in ACP100 integrated head package

Effect Of Radiative Heat Transfer Factor On The Temperature Distribution Of A First Stage Vane

Numerical Analysis of Transpiration Cooling in Annular Slinger Combustor

Numerical Modeling of Infrared Radiation Properties of Exhaust Plume by the Discrete Ordinates Method in Body-Fitted Coordinates