Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Modal Analysis of Multi-Cylinder Engine Block

The Holistic Finite Element Model Analysis of Diesel Engine

Vibration Analysis of an Engine Cylinder Block

Research on Dynamic_characteristics of Three_cylinders Internal Combustion Engine Block

Modal Analysis of Crankshaft for Two-Stroke Marine Diesel Engine Based on Block Lanczos Method

Structural Dynamic Response Analysis of Multi-Cylinder Engine Block under Exciting of Main Bearing Forces

Analysis Of Structural Dynamic Response Of Multi-Cylinder Internal Combustion Engine Block Under The Excitation Of Piston Thrust Forces

Dynamic simulation research on diesel engine's cranktrain and block

Study on Kinematic Characteristic Simulation of a Single-cylinder Engine Based on Pro/Engineer

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block

The Strength Analysis of Cylinder Block and the Fatigue Life Prediction of Main Bearing Block for a Diesel Engine

Interface dealing in engine block assembly modal analysis by FEM

Modal Analysis on Dual-Rotor System of Aero-Engine

Shape Optimization and Sensitivity Analysis for Cylinder Block of 4100QB Diesel Engine

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

Modal and vibration analysis of reciprocating compressor crankshaft system

Influence of multi-body dynamics modeling method on simulation of engine main bearing force

Ship’s Engine and Double-layer Bottom Coupled Vibration Analysis Using Component Mode Synthesis

Body structural modeling technique for diesel engines based on modal method

A Numerical Simulation Of The Coupling Between Dynamic Behavior And Tribological Behavior In Cylinder-Piston System In Ic Engine

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine