Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

A Study of the Transverse Dispersion of Solid Particles in the Dense-phase Zone of a Circulating Fluidized Bed Boiler

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Dispersion Trajectory and Dynamics of Particles Injected from the Sidewall in the Gas–Solid Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Discrete Element Study of Solid Circulating and Resident Behaviors in an Internally Circulating Fluidized Bed

Lateral Solids Mixing In The Dense Zone Of A Circulating Fluidized Bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed

Effect of Bed Material Particle Size Distribution on Lateral Dispersion in a CFB Dense Zone Using CPFD Method

Lateral dispersion coefficient of large solid particles in CFB dense zone using CPFD method

Gas Mixing In The Cocurrent Downflow Circulating Fluidized-Bed

MP-PIC Simulation on Solid Dispersion in a 350 MW CFB Boiler

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental Research on Density of Matters in Suspension in Circulating Fluidized Bed Boilers Under Different Operational Conditions

Experimental Study on the Heat Transfer Coefficient Between A Freely Moving Sphere and A Fluidized Bed of Small Particles

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Visual Measurement of Particle Movement in Rectangular Circulating Fluidized Bed

Lateral Gas Mixing In The Freeboard Zone Of A Cfb Boiler

Particle Residence Time Distribution in a Circulating Fluidized Bed